We are not the manufacturer, authorised distributor or authorised representative of the Wenglor brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Wenglor
Country
Germany
Part number
YH08PCT8
Description
WENGLOR LASER YH08 PCT8
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Wenglor YH08PCT8, connect FAMAGA, the world's influential supplier of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and special attention to each orderer. We esteem everyone, who cooperated with us - therefore, our regular purchasers receive the most acceptable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly sign new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Venezuela, Cape Verde, Senegal, Slovenia, Russia, Samoa, Mexico, Lebanon, Indonesia, Finland, Tajikistan, Latvia, Guinea, Thailand, Madagascar, Angola, Greece, Comoros, Austria, Botswana, Gambia, Cyprus, Ecuador, Mali, Mauritius, Turkey, Guyana, Niger, China, Togo, Serbia, Brazil, Afghanistan, Burkina Faso, Kenya, South Korea, Belarus, Georgia, Bosnia and Herzegovina, Estonia, Dominica, Seychelles, United States. A well-built logistics network and a partnership network guide us to conduct our goods anywhere in the world as soon as possible without discrediting product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of industrial equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Fork Width | 80 mm |
| Smallest Recognizable Part | 40 µm |
| Smallest Detectable Gap | 50 µm |
| Switching Hysteresis | < 20 µm |
| Light Source | Laser (red) |
| Wavelength | 655 nm |
| Service Life (T = +25 °C) | 100000 h |
| Laser Class (EN 60825-1) | 2 |
| Max. Ambient Light | 10000 Lux |
| Light Spot Diameter | 0,6 mm |
| Repeat Accuracy | < 5 µm |
| Supply Voltage | 10...30 V DC |
| Current Consumption (Ub = 24 V) | < 50 mA |
| Switching Frequency | 10 kHz |
| Response Time | 50 µs |
| Off-Delay | 0...100 ms |
| Temperature Range | -25...60 °C |
| Switching Output Voltage Drop | < 1,5 V |
| PNP Switching Output/Switching Current | 200 mA |
| internal Load Switching Output | 5100 Ohm |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT, MT |
| Protection Class | III |
| FDA Accession Number | 0820592-000 |
| Setting Method | Teach-In |
| Housing Material | Plastic, Steel, nickel-plated |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M8 ? 1, 3-pin |
| MTTFd (EN ISO 13849-1) | 1436,4 a |
| PNP NO/NC switchable | yes |
