Wenglor P1KL018
  Wenglor P1KL018

We are not the manufacturer, authorised distributor or authorised representative of the Wenglor brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

P1KL018 Wenglor

Manufacturer

Wenglor

Country

Germany

Part number

P1KL018

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications P1KL018

If you are inspecting Wenglor P1KL018, make contact with FAMAGA, the world's central retailer of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are represented in the quality of goods and special attention to each client. We cherish everyone, who liased with us - so, our regular purchasers pick up the most helpful purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such clients, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the globe . A well-elaborated logistics system and a partnership network cheer us to conduct our goods anywhere in the earth immediately without undermining product quality.

A specific source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the direction of manufacturing equipment.

All products from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this number is growing every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as stay in control.

To inquire or place an order, phone us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features P1KL018

  • Condition monitoring
  • Detect extremely small parts starting at 0.15 mm
  • Focused optics
  • High switching frequency
  • IO-Link 1.1
The retro-reflex sensor works with a fine laser beam and a reflector. The focused laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of 0.25 millimeter over the entire range. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Range 3000 mm
Reference Reflector/Reflector Foil RE6151BM
Smallest Recognizable Part 0,15 mm
Switching Hysteresis < 15 %
Light Source Laser (red), focused
Wavelength 680 nm
Polarization Filter yes
Service Life (T = +25 °C) 100000 h
Laser Class (EN 60825-1) 1
Max. Ambient Light 10000 Lux
Light Spot Diameter 0,5 mm
Focus Distance 180...220 mm
Two-Lens Optic yes
Electrical Data
Supply Voltage 10...30 V DC
Supply Voltage with IO-Link 18...30 V DC
Current Consumption (Ub = 24 V) < 15 mA
Switching Frequency 2000 Hz
Switching frequency (speed mode) 4000 Hz
Response Time 0,25 ms
Response time (speed mode) 0,125 ms
Temperature Drift < 10 %
Temperature Range -40...60 °C
Switching Output Voltage Drop < 2 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit and Overload Protection yes
Reverse Polarity Protection yes
Lockable yes
Interface IO-Link V1.1
Protection Class III
FDA Accession Number 1710976-001
Mechanical Data
Setting Method Potentiometer
Housing Material Plastic
Degree of Protection IP67/IP68
Connection M8 ? 1, 3-pin
Optic Cover PMMA
Safety-relevant Data
MTTFd (EN ISO 13849-1) 2617,62 a
Output
IO-Link yes
PNP NO yes