We are not the manufacturer, authorised distributor or authorised representative of the Wenglor brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Wenglor OPT1546, get in touch with FAMAGA, the world's key vendor of mechanized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and particular attention to each customer. We respect everyone, who worked with us - so, our regular customers obtain the most convenient purchase conditions and discounts on the industrial equipment market. At present, there are more than 4500 such customers, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Iran, Finland, Bahamas, Tanzania, Mexico, Panama, Oman, Vietnam, Latvia, South Korea, Eritrea, Croatia, Madagascar, Georgia, Kyrgyzstan, Burkina Faso, Monaco, Armenia, Belarus, Saudi Arabia, Malaysia, Azerbaijan, Namibia, Australia, Russia, Rwanda, Albania, Peru, United States, Libya, Sweden, Yemen, Mali, Kuwait, Estonia, China, Poland, Norway, Haiti, Nepal. A advanced logistics network and a partnership network assist us to send our goods anywhere in the world immediately without compromising product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Service Life (T = +25 °C) | 100000 h |
Supply Voltage | 20,6...30 V DC |
Current Consumption Sensor (Ub = 24 V) | < 16 mA |
EcoMode | yes |
Switching Frequency | 100 Hz |
Response Time | 5 ms |
Temperature Range | -40...60 °C |
Number of Switching Outputs | 2 |
Switching Output Voltage Drop | < 0,9 V |
PNP Switching Output/Switching Current | 200 mA |
Short Circuit Protection | yes |
Reverse Polarity Protection | yes |
Overload Protection | yes |
Logic | yes |
Single Discharge | yes |
Block Forwarding | yes |
Solenoid Valve | yes |
Automatic Roller Shutdown | yes |
Protection Class | III |
Setting Method | NFC |
Housing Material | Plastic |
Degree of Protection | IP65 |
Connection | M12 ? 1, 4-pin |
Cable Length | 100 cm |
Valve no. | K04 |
Supply Voltage Valve | 19,2...28,8 V |
Current Consumption Valve | 86 mA |
Valve temperature range | -15...50 °C |
Operating Pressure | 4...7 bar |
Nominal Width | 0,8 mm |
Nominal flow rate 1 -> 2 | 20 NL/min |
Nominal flow rate 2 -> 3 | 100 NL/min |
Supply-Line Connector Pipe | 2? 8?1 |
Working-Line Connector Pipe | 4?1 |
Valve function | 3/2-Way |
Switching function | NC |
PNP NO/NC switchable | yes |
NFC Receiver Category 3 | yes |