We are not the manufacturer, authorised distributor or authorised representative of the Wenglor brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Wenglor OPT144, contact FAMAGA, the world's prime provider of streamlined equipment. Our company has worked for more than ten years - these are years of experience, which are depicted in the quality of outcomes and personalseparate attention to each user. We appreciate everyone, who collaborated with us - therefore, our regular buyers receive the most convenient purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4000 such clients, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Monaco, Colombia, Swaziland, Philippines, Israel, Netherlands, Congo, Belarus, South Korea, Burma, Zimbabwe, Ireland, Malawi, Azerbaijan, Botswana, Bosnia and Herzegovina, Haiti, China, Kazakhstan, Costa Rica, Guatemala, Mongolia, New Zealand, Bolivia, Croatia, Sierra Leone, Yemen, Brunei, Sweden, South Sudan, Qatar, Norway, Malaysia, Australia, United Arab Emirates, Eswatini, Latvia, Mexico, Tajikistan, Rwanda, Albania, Ukraine. A well-developed logistics series and a partnership network guide us to conduct our items anywhere in the world as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All items from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this amount is ascending every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or order, call us by phone or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Range | 550 mm |
Potentiometer min | 220...270 mm |
Potentiometer center | 320...400 mm |
Potentiometer max | 550...630 mm |
Switching Hysteresis | < 15 % |
Light Source | Infrared Light |
Wavelength | 880 nm |
Service Life (T = +25 °C) | 100000 h |
Risk Group (EN 62471) | 1 |
Max. Ambient Light | 10000 Lux |
Opening Angle | 5 ° |
Supply Voltage | 18...30 V DC |
Current Consumption Sensor (Ub = 24 V) | < 30 mA |
Switching Frequency | 100 Hz |
Response Time | 5 ms |
Temperature Drift | < 10 % |
Temperature Range | -25...60 °C |
Number of Switching Outputs | 1 |
Switching Output Voltage Drop | < 0,8 V |
PNP Switching Output/Switching Current | 200 mA |
Valve or Motor Output/Switching Current | 200 mA |
Short Circuit Protection | yes |
Reverse Polarity Protection | yes |
Overload Protection | yes |
Logic | yes |
Single Discharge | yes |
Block Forwarding | yes |
Output Magnetic Valve/Engine | yes |
Protection Class | III |
Setting Method | Potentiometer |
Housing Material | Plastic |
Full Encapsulation | yes |
Degree of Protection | IP65 |
Connection | M12 ? 1, 4-pin |
Cable Length | 88 cm |
PNP NC | yes |