We are not the manufacturer, authorised distributor or authorised representative of the Schmersal brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Schmersal
Country
Germany
Name
AZM 170SK-02ZRKA 24 VAC/DC
Category
Lock devices
Type
Solenoid interlock
Description
Solenoid interlock
Stock availability:
On request
If you are pursuing Schmersal AZM 170SK-02ZRKA 24 VAC/DC , catch up with FAMAGA, the world's key distributor of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are outlined in the quality of merchandises and special attention to each consumer. We understand everyone, who conspired with us - therefore, our regular clients receive the most favorable purchase terms and discounts on the factory-made equipment market. Now, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Barbados, Brazil, Palestine, Croatia, Burma, Benin, Gambia, Tonga, South Sudan, Switzerland, Monaco, Zambia, Ecuador, Uzbekistan, The Gambia, Uruguay, Grenada, Mexico, Tanzania, Sierra Leone, Kyrgyzstan, Chad, Algeria, Finland, Lithuania, Bangladesh, East Timor, Armenia, Turkmenistan, Paraguay, Chile, Albania, Cameroon, Poland, New Zealand, Ghana, Andorra, Tunisia, Laos, Iraq, Thailand, Montenegro. A well-shaped logistics chains and a partnership network allow us to send our elements anywhere in the planet on-time without damaging product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as stay in control.
To request or order, contact us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
General data | |
Standards | EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-1 |
Coding level according to EN ISO 14119 | Low |
Working principle | electromechanical |
Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
General data - Features | |
Power to lock | Yes |
Manual release | Yes |
Number of actuating directions | 2 |
Number of safety contacts | 2 |
Safety classification | |
Standards | EN ISO 13849-1 |
Performance Level, up to | c |
Category | 1 |
B10D Normally-closed contact (NC) | 2,000,000 Operations |
Note | Electrical life on request. |
B10D Normally-open contact (NO) | 1,000,000 Operations |
Note | at 10% Ie and ohmic load |
Mission time | 20 Year(s) |
Safety classification - Fault exclusion | |
Please note: | Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
Performance Level, up to | d |
Category | 3 |
Note | for 2-channel use and with suitable logic unit. |
Mission time | 20 Year(s) |
Mechanical data | |
Mechanical life, minimum | 1,000,000 Operations |
Holding force FZh in accordance with EN ISO 14119 | 1,000 N |
Holding force Fmax, maximum | 1,300 N |
Latching force | 30 N |
Positive break travel | 11 mm |
Positive break force per NC contact, minimum | 8.5 N |
Positive break force, minimum | 17 N |
Actuating speed, maximum | 2 m/s |
Mounting | Screws |
Type of the fixing screws | 2x M5 |
Tightening torque of the fastening screws for the housing cover, minimum | 0.7 Nm |
Tightening torque of the fastening screws for the housing cover, maximum | 1 Nm |
Note | Torx T10 |
Mechanical data - Connection technique | |
Termination | Screw terminals |
Cable section, minimum | 0.25 mm² |
Cable section, maximum | 1.5 mm² |
Note (Cable section) | All indications including the conductor ferrules. |
Allowed type of cable | solid single-wire solid multi-wire flexible |
Ambient conditions | |
Degree of protection | IP67 |
Ambient temperature | -25 ... +60 °C |
Storage and transport temperature, minimum | -25 °C |
Storage and transport temperature, maximum | +85 °C |
Protection class | II |
Permissible installation altitude above sea level, maximum | 2,000 m |
Ambient conditions - Insulation values | |
Rated insulation voltage Ui | 250 VAC |
Rated impulse withstand voltage Uimp | 4 kV |
Overvoltage category | III |
Degree of pollution | 3 |
Electrical data | |
Thermal test current | 6 A |
Rated control voltage | 24 VAC/DC |
Required rated short-circuit current | 1,000 A |
Electrical power consumption, maximum | 12 W |
Switching element | Opener (NC) |
Note (Switching element) | Change-over contact with double break, type Zb or 2 NC contacts, with galvanically separated contact bridges |
Switching principle | slow action, positive break NC contact |
Switching frequency | 1,000 /h |
Material of the contacts, electrical | Silver |
Electrical data - Magnet control | |
Magnet switch-on time | 100 % |
Test pulse duration, maximum | 5 ms |
Test pulse interval, minimum | 50 ms |
Electrical data - Safety contacts | |
Voltage, Utilisation category AC-15 | 230 VAC |
Current, Utilisation category AC-15 | 4 A |
Voltage, Utilisation category DC-13 | 24 VDC |
Current, Utilisation category DC-13 | 2.5 A |