We are not the manufacturer, authorised distributor or authorised representative of the Murrelektronik brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Murrelektronik
Country
Germany
Part number
7000-40581-2310400
Category
Connectors for data transmission
Type
Connector
Description
PUR 4x0.25 gy UL/CSA+drag chain 4m
Stock availability:
On request
If you are looking for Murrelektronik 7000-40581-2310400, contact FAMAGA, the world's principle provider of industrial equipment. Our company has functioned for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and personalseparate attention to each consumer. We value everyone, who worked with us - hence, our regular clients pick up the most helpful purchase forms and discounts on the factory-made equipment market. Today, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Angola, Indonesia, Palestine, Chile, Belarus, Norway, Honduras, Haiti, Argentina, Equatorial Guinea, South Korea, Saudi Arabia, Russia, Zimbabwe, Cape Verde, Namibia, Madagascar, Syria, Kyrgyzstan, Albania, Morocco, Kuwait, China, El Salvador, Estonia, Philippines, United Arab Emirates, Vietnam, Samoa, The Gambia, Malaysia, Czech Republic, Egypt, Nepal, United States, Brazil, Hungary, Burkina Faso, Sweden. A advanced logistics network and a partnership network assist us to dispatch our goods anywhere in the world with no delay without damaging product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To get some advice or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Form | 40581 |
---|
No./diameter of wires | 4 × 0.25 mm× |
---|---|
C-track properties | 10 Mio. |
Wire isolation | PP (br, wh, bl, bk) |
Material (jacket) | PUR (UL/CSA) |
Outer O | 4.5 mm ±5% |
Bend radius (moving) | 10 × outer O |
Temperature range (fixed) | -40...+80 °C |
Temperature range (mobile) | -25...+80 °C |
Cable identification | 231 |
Cable Type | 3 (PUR) |
Approval (cable) | cRUus (AWM-Style 20549/10493); CE conform |
Cable weight [g/m] | 33,00 |
Material (wire) | Cu wire, bare |
Resistor (core) | max. 79 ×/km (20 °C) |
Single wire O (core) | 0.1 mm |
Construction (core) | 32 × 0.1 mm (multi-strand wire class 6) |
Diameter (core) | 4 × 0.25 mm× |
AWG | similar to AWG 24 |
Material (wire isolation) | PP |
Material property (wire isolation) | CFC-, halogen-, cadmium-, silicone- and lead-free |
Shore hardness (wire isolation) | 70 ±5 D |
Wire-O incl. isolation | 1.25 mm ±5% |
Color/numbering of wires | br, bk, bl, wh |
Stranding combination | 4 wires twisted |
Shield | no |
Material (jacket) | PUR |
Material property (jacket) | CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant |
Shore hardness (jacket) | 90 ±5 A |
Outer-O (jacket) | 4.5 mm ±5% |
Color (jacket) | gray |
chemical resistance | good resistance to oil, gasoline and chemicals (EN 60811-404) |
thermal resistance | flame retardant UL 1581 VW1 / CSA FT1 / IEC 60332-1, IEC 60332-2-2 |
Nominal voltage | 300 V AC |
Test voltage | 2 500 V AC |
Current load capacity | to DIN VDE 0298-4 |
Temperature range (fixed) | -40...+80 °C, (+90 °C at max. 10 000 operating hours) |
Temperature range (mobile) | -25...+80 °C, (+90 °C at max. 10 000 operating hours) |
Bend radius (fixed) | 5 × outer O |
Bend radius (moving) | 10 × outer O |
No. of bending cycles (C-track) | max. 10 Mio. (25 °C) |
Travel speed (C-track) | max. 3 m/s |
Acceleration (C-track) | max. 10 m/s× |
Torsion stress | ±180°/m |
No. of torsion cycles | max. 2 Mio. (25 °C) |
Torsion speed | 35 cycles/min |
Jacket Color | gray |
Operating voltage | max. 50 V AC/60 V DC |
---|---|
Operating voltage (only UL listed) | max. 30 V AC/DC |
Rated surge voltage | 1.5 kV |
Operating current per contact | max. 4 A |
Material group | IEC 60664-1, category I |
No. of poles | 4 |
Coding | A-coded |
LED display | no |
Locking of ports | Screw thread M8/M12 × 1 mm (recommended torque 0.4/0.6 Nm) self-securing |
Compression gland | M8 (SW9), M12 (SW13) |
Protection | IP65, IP66K, IP67 inserted and tightened (EN 60529) |
Material | PUR |
Locking material | Zinc die casting, matte nickel plated |
suitable for corrugated tube (internal O) | M12 (10 mm); M8 (6.5 mm) |
Standards | DIN EN 61076-2-101 (M12), DIN EN 61076-2-104 (M8) |
---|---|
Mounting method | inserted, tightened |
Material (contact) | Copper alloy |
Material (gasket) | FKM |
Pollution Degree | 3 |
Temperature range | -25...+85 °C, depending on cable quality |
country of origin | DE |
---|---|
customs tariff number | 85444290 |
EAN | 4048879162159 |
eClass | 27279218 |
Packaging unit | 1 |