We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
DIA-BUR36-A-120
Description
Electroplated Diamond Bar (6 Steel Shank)
Stock availability:
On request
If you are looking for MISUMI DIA-BUR36-A-120, make contact with FAMAGA, the world's top retailer of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are symbolized in the quality of products and special attention to each purchaser. We praise everyone, who collaborated with us - so, our regular purchasers pick up the most flexible purchase conditions and discounts on the industrial equipment market. At present, there are more than 3500 such purchasers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Barbados, Russia, Lebanon, China, Tonga, Latvia, Honduras, Sri Lanka, Panama, South Sudan, Croatia, Finland, Paraguay, Guatemala, Mali, East Timor, Chile, Poland, Bhutan, Seychelles, Ukraine, Guyana, Monaco, Equatorial Guinea, Kuwait, Haiti, Iran, Hungary, India, Mozambique, Sweden, Tajikistan, Sierra Leone, Nepal, Benin, Mauritius, Malaysia, Jamaica, Indonesia, Georgia, Angola, South Korea, Montenegro, Samoa, Israel. A well-developed logistics series and a partnership network assist us to send our elements anywhere in the world on-time without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are happy that users choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as to stay on the top.
To inquire or book, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Model Number | No. | Particle Size (#) | Shape | Diamond Part Maximum Diameter (D) | Diamond Part Thickness (T) | Angle | Shaft Diameter | Total Length | Maximum Operating Rotational Speed (rpm) | Set Relevant Standard |
DIA-BUR19 | A | 100 | 6.5 | 15 | - | 6 | 60 | 65,000 | ||
B | 8 | * | ||||||||
C | 10 | 10 | ||||||||
D | 19 | |||||||||
E | 32 | 65 | ||||||||
F | 18 | 26 | 60 | 30,000 | ||||||
DIA-BUR20 | A | 8 | - | 65,000 | * | |||||
B | 10 | |||||||||
C | 16 | 35,000 | ||||||||
D | 20 | 30,000 | ||||||||
DIA-BUR21 | A | 6.5 | 15 | 65,000 | * | |||||
B | 8 | |||||||||
C | 10 | 19 | ||||||||
D | 6 | 32 | ||||||||
DIA-BUR22 | A | 10 | 1.2 | * | ||||||
DIA-BUR23 | A | 6.5 | 22 | * | ||||||
B | 7 | |||||||||
C | 8 | 15 | * | |||||||
D | 10 | 19 | ||||||||
DIA-BUR24 | A | |||||||||
DIA-BUR25 | A | 6 | 12 | |||||||
B | 15 | |||||||||
C | 8 | 30� (tip angle) | * | |||||||
D | 10 | 20 | 28� (tip angle) | |||||||
DIA-BUR26 | A | 6 | 13 | - | ||||||
B | 9 | 18 | ||||||||
C | 10 | 16 | ||||||||
D | 12 | 25 | 50,000 | |||||||
DIA-BUR27 | A | 10 | 9 | 90� (tip angle) | 65,000 | |||||
DIA-BUR28 | A | 14 | 18 | - | 35,000 | |||||
B | 16 | |||||||||
DIA-BUR29 | A | 6.5 | 25 | 10� (slope) | 65,000 | * | ||||
DIA-BUR30 | A | 8 | 15 | - | * | |||||
DIA-BUR31 | A | 25 | 5 | 30,000 | ||||||
DIA-BUR32 | A | 8 | 20� (edge angle) | 65,000 | * | |||||
DIA-BUR33 | A | 8 | 10 | - | ||||||
DIA-BUR34 | A | 16.5 | 6 | 35,000 | ||||||
B | 20 | 30,000 | ||||||||
C | 25 | 7 | ||||||||
DIA-BUR35 | A | 25 | 4 | |||||||
DIA-BUR36 | A | 120 | 6 | 33 | 10� (tip angle) | 65,000 | ||||
B | 28 | 12� (tip angle) | ||||||||
C | 23 | 14� (tip angle) | ||||||||
D | 21 | 16� (tip angle) | ||||||||
E | 17 | 20� (tip angle) | ||||||||
F | 10 | 19 | 30� (tip angle) |
Model Number | No. | Particle Size (#) | Set Content |
DIA-BUR37 | S | 100 | · For the Above * Symbol, 1 Piece Each of 10 Types / In Dedicated Case |