We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJBSKM16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1]
Description
Bushings for Inspection Components/D-Shape
Stock availability:
On request
If you are looking for MISUMI KJBSKM16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1], reach FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and individual attention to each client. We value everyone, who conspired with us - thus, our regular consumers receive the most convenient purchase conditions and discounts on the factory-made equipment market. Now, there are more than 3500 such clients, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, China, The Bahamas, Nigeria, Equatorial Guinea, Turkmenistan, Honduras, Zambia, Angola, Papua New Guinea, Belgium, Tunisia, Luxembourg, Guinea, Tajikistan, Philippines, Dominica, Monaco, Finland, Slovakia, Brazil, Cape Verde, Serbia, Mozambique, Guyana, Georgia, Ecuador, Croatia, Greece, Indonesia, Morocco, Uruguay, South Korea, Togo, Swaziland, Jamaica, Panama, El Salvador, Burkina Faso, Nepal, Ghana, Bolivia, Iceland, Zimbabwe, Eswatini. A well-developed logistics chains and a partnership network guide us to send our elements anywhere in the world with no delay without compromising product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as to stay on the top.
To get some advice or make a request, phone us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Hardness | Surface Treatment | Type | |
P+0.03 +0.01 F+0.05 0 | PH7 F+0.03 0 | |||
JIS-SKS93 Equiv. | 50~60HRC | - | KJBSK | KJBHSK |
JIS-SKS93 Equiv. | 50~60HRC | Electroless Nickel Plating | KJBSKM | KJBHSKM |
EN 1.4301 Equiv.2 | - | - | KJBSKS | KJBHSKS |
EN 1.4125 Equiv. | 45~50HRC | - | KJBSKC | KJBHSKC |
Part Number | - | P | - | F | - | L |
KJBSK12 | - | P8.00 | - | F3.0 | - | L10 |
P | H7 |
3.00~6.00 | +0.012 0 |
6.01~10.00 | +0.015 0 |
10.01~18.00 | +0.018 0 |
18.01~21.00 | +0.021 0 |
Part Number | P 0.01mm Increment | F (F | L 1mm Increment | Compliance with Standard | |||||||||
Type | D | Straight | |||||||||||
Straight1 | P+0.03 +0.01 F+0.05 ?0 | PH7 F+0.03 ?0 | |||||||||||
P+0.03 +0.01 F+0.05 ?0 | PH7 F+0.03 ?0 | KJBSK | KJBSKM | KJBSKS | KJBSKC | KJBHSK | KJBHSKM | KJBHSKS | KJBHSKC | ||||
KJBSK KJBSKM KJBSKS KJBSKC | KJBHSK KJBHSKM KJBHSKS KJBHSKC | 83 | 3.00~?5.00 | 0.3~?2.4 | 5~25 | ? | ? | - | ? | ? | ? | - | ? |
10 | 3.00~?7.00 | 0.3~?3.0 | ? | ? | ? | ? | ? | ? | ? | ? | |||
12 | 3.00~?9.00 | 0.5~?4.0 | ? | ? | ? | ? | ? | ? | ? | ? | |||
16 | 4.00~13.00 | 0.5~?6.0 | ? | ? | ? | ? | ? | ? | ? | ? | |||
20 | 6.00~17.00 | 1.0~?8.0 | ? | ? | ? | ? | ? | ? | ? | ? | |||
25 | 8.00~21.00 | 2.0~10.0 | ? | ? | ? | ? | ? | ? | ? | ? |