We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI JZB8-5, reach FAMAGA, the world's chief distributor of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of products and private attention to each client. We admire everyone, who liased with us - thus, our regular buyers pick up the most convenient purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, France, El Salvador, Congo, Uzbekistan, Thailand, Albania, Rwanda, Mauritania, Antigua and Barbuda, North Korea, Latvia, Macedonia, Czech Republic, Ecuador, Panama, Paraguay, Bolivia, Cameroon, Brazil, Saudi Arabia, Hungary, Tonga, Croatia, Nigeria, Niger, Indonesia, Algeria, Georgia, Norway, Kiribati, Qatar, Bangladesh, Botswana, Australia, Iraq, Uruguay, Benin, Senegal, Ghana, India, Namibia, Eswatini, Lithuania. A well-shaped logistics bond and a partnership network allow us to deliver our products anywhere in the earth as soon as possible without discrediting product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To inquire or book, get in touch with us or write to the online chat on our site. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | - | L |
JZB10 | - | 12 |
Part Number | L | D | Chamfer | *1 Housing Dia. | *1 Shaft Diameter | ||||||||||||||||||
Type | d (Tolerance after press fitting) | a | b | Ref. Dim. | Tolerance (H7) | Ref. Dim. | Tolerance (H7) | ||||||||||||||||
Straight JZB | 3 | +0.080 +0.030 | 3 | 4 | 5 | 5 | +0.107 +0.032 | 1* | C0.3 | 5 | + 0.012 0 | 3 | 0 - 0.010 | ||||||||||
4 | +0.095 +0.045 | 3 | 4 | 5 | 6 | 6 | +0.107 +0.032 | 1* | C0.3 | 6 | + 0.012 0 | 4 | 0 - 0.012 | ||||||||||
5 | +0.095 +0.045 | 3 | 4 | 5 | 6 | 8 | 7 | +0.157 +0.045 | 1* | C0.3 | 7 | + 0.015 0 | 5 | 0 - 0.012 | |||||||||
6 | +0.095 +0.045 | 4 | 5 | 6 | 8 | 10 | 8 | +0.157 +0.045 | 1* | C0.3 | 8 | + 0.015 0 | 6 | 0 - 0.012 | |||||||||
8 | +0.120 +0.060 | 5 | 6 | 8 | 10 | 12 | 15 | 10 | +0.157 +0.045 | 1 | C0.3 | 10 | + 0.015 0 | 8 | 0 - 0.015 | ||||||||
10 | +0.120 +0.060 | 6 | 8 | 10 | 12 | 15 | 20 | 12 | +0.193 +0.058 | 1 | C0.3 | 12 | + 0.018 0 | 10 | 0 - 0.015 | ||||||||
12 | +0.120 +0.060 | 8 | 10 | 12 | 15 | 20 | 14 | +0.193 +0.058 | 1 | R0.4 | 14 | + 0.018 0 | 12 | 0 - 0.018 | |||||||||
15 | +0.120 +0.060 | 10 | 12 | 15 | 20 | 25 | 17 | +0.193 +0.058 | 1 | R0.4 | 17 | + 0.018 0 | 15 | 0 - 0.018 | |||||||||
16 | +0.120 +0.060 | 10 | 12 | 15 | 20 | 25 | 18 | +0.193 +0.058 | 1 | R0.4 | 18 | + 0.018 0 | 16 | 0 - 0.018 | |||||||||
18 | +0.120 +0.060 | 12 | 15 | 20 | 25 | 30 | 20 | +0.221 +0.071 | 1 | R0.4 | 20 | + 0.021 0 | 18 | 0 - 0.018 | |||||||||
20 | +0.145 +0.075 | 15 | 20 | 25 | 30 | 23 | +0.221 +0.071 | 1 | R0.4 | 23 | + 0.021 0 | 20 | 0 - 0.021 | ||||||||||
22 | +0.145 +0.075 | 20 | 30 | 25 | +0.231 +0.081 | 1 | R0.4 | 25 | + 0.021 0 | 22 | 0 - 0.021 | ||||||||||||
25 | +0.170 +0.090 | 20 | 25 | 30 | 28 | +0.231 +0.081 | 1 | R0.4 | 28 | + 0.021 0 | 25 | 0 - 0.021 | |||||||||||
30 | +0.170 +0.090 | 20 | 25 | 30 | 40 | 34 | +0.290 +0.095 | 1 | R0.4 | 34 | + 0.025 0 | 30 | 0 - 0.021 | ||||||||||
35 | +0.215 +0.115 | 25 | 30 | 40 | 39 | +0.290 +0.095 | 1 | R0.4 | 39 | + 0.025 0 | 35 | 0 - 0.025 | |||||||||||
40 | +0.215 +0.115 | 30 | 40 | 50 | 44 | +0.340 +0.115 | 2 | R0.6 | 44 | + 0.025 0 | 40 | 0 - 0.025 | |||||||||||
50 | +0.235 +0.135 | 30 | 40 | 50 | 55 | +0.430 +0.130 | 2 | R0.8 | 55 | + 0.030 0 | 50 | 0 - 0.025 | |||||||||||
* When selecting 3-3, 3-4, 4-3, 4-4, 4-6, 5-3, 5-4, 6-4 and 6-5, a=0.5. d tolerance is the value after press fitting into ring gauge of d�0.002. *1 Housing diameters and shaft diameters listed here are recommended dimensions. I.D. Tolerance is guaranteed value after press fit. |