We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI JZB6-8, make contact with FAMAGA, the world's primary vendor of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of products and individual attention to each orderer. We praise everyone, who conspired with us - thus, our regular buyers bring in the most convenient purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Palestine, The Gambia, Myanmar, Liechtenstein, Australia, Samoa, Czech Republic, Burkina Faso, Cameroon, Andorra, Indonesia, India, Paraguay, Burundi, Vietnam, Kazakhstan, Djibouti, North Korea, Slovakia, Liberia, Rwanda, Denmark, Qatar, Mongolia, Chile, Yemen, Sierra Leone, Philippines, Ukraine, Armenia, Panama, Equatorial Guinea, United States, Uruguay, Bosnia and Herzegovina, Uganda, Ireland, Thailand, Bulgaria, Nigeria, Moldova, Norway, Mali. A well-developed logistics chains and a partnership network guide us to dispatch our units anywhere in the earth on-time without discrediting product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | - | L |
JZB10 | - | 12 |
Part Number | L | D | Chamfer | *1 Housing Dia. | *1 Shaft Diameter | ||||||||||||||||||
Type | d (Tolerance after press fitting) | a | b | Ref. Dim. | Tolerance (H7) | Ref. Dim. | Tolerance (H7) | ||||||||||||||||
Straight JZB | 3 | +0.080 +0.030 | 3 | 4 | 5 | 5 | +0.107 +0.032 | 1* | C0.3 | 5 | + 0.012 0 | 3 | 0 - 0.010 | ||||||||||
4 | +0.095 +0.045 | 3 | 4 | 5 | 6 | 6 | +0.107 +0.032 | 1* | C0.3 | 6 | + 0.012 0 | 4 | 0 - 0.012 | ||||||||||
5 | +0.095 +0.045 | 3 | 4 | 5 | 6 | 8 | 7 | +0.157 +0.045 | 1* | C0.3 | 7 | + 0.015 0 | 5 | 0 - 0.012 | |||||||||
6 | +0.095 +0.045 | 4 | 5 | 6 | 8 | 10 | 8 | +0.157 +0.045 | 1* | C0.3 | 8 | + 0.015 0 | 6 | 0 - 0.012 | |||||||||
8 | +0.120 +0.060 | 5 | 6 | 8 | 10 | 12 | 15 | 10 | +0.157 +0.045 | 1 | C0.3 | 10 | + 0.015 0 | 8 | 0 - 0.015 | ||||||||
10 | +0.120 +0.060 | 6 | 8 | 10 | 12 | 15 | 20 | 12 | +0.193 +0.058 | 1 | C0.3 | 12 | + 0.018 0 | 10 | 0 - 0.015 | ||||||||
12 | +0.120 +0.060 | 8 | 10 | 12 | 15 | 20 | 14 | +0.193 +0.058 | 1 | R0.4 | 14 | + 0.018 0 | 12 | 0 - 0.018 | |||||||||
15 | +0.120 +0.060 | 10 | 12 | 15 | 20 | 25 | 17 | +0.193 +0.058 | 1 | R0.4 | 17 | + 0.018 0 | 15 | 0 - 0.018 | |||||||||
16 | +0.120 +0.060 | 10 | 12 | 15 | 20 | 25 | 18 | +0.193 +0.058 | 1 | R0.4 | 18 | + 0.018 0 | 16 | 0 - 0.018 | |||||||||
18 | +0.120 +0.060 | 12 | 15 | 20 | 25 | 30 | 20 | +0.221 +0.071 | 1 | R0.4 | 20 | + 0.021 0 | 18 | 0 - 0.018 | |||||||||
20 | +0.145 +0.075 | 15 | 20 | 25 | 30 | 23 | +0.221 +0.071 | 1 | R0.4 | 23 | + 0.021 0 | 20 | 0 - 0.021 | ||||||||||
22 | +0.145 +0.075 | 20 | 30 | 25 | +0.231 +0.081 | 1 | R0.4 | 25 | + 0.021 0 | 22 | 0 - 0.021 | ||||||||||||
25 | +0.170 +0.090 | 20 | 25 | 30 | 28 | +0.231 +0.081 | 1 | R0.4 | 28 | + 0.021 0 | 25 | 0 - 0.021 | |||||||||||
30 | +0.170 +0.090 | 20 | 25 | 30 | 40 | 34 | +0.290 +0.095 | 1 | R0.4 | 34 | + 0.025 0 | 30 | 0 - 0.021 | ||||||||||
35 | +0.215 +0.115 | 25 | 30 | 40 | 39 | +0.290 +0.095 | 1 | R0.4 | 39 | + 0.025 0 | 35 | 0 - 0.025 | |||||||||||
40 | +0.215 +0.115 | 30 | 40 | 50 | 44 | +0.340 +0.115 | 2 | R0.6 | 44 | + 0.025 0 | 40 | 0 - 0.025 | |||||||||||
50 | +0.235 +0.135 | 30 | 40 | 50 | 55 | +0.430 +0.130 | 2 | R0.8 | 55 | + 0.030 0 | 50 | 0 - 0.025 | |||||||||||
* When selecting 3-3, 3-4, 4-3, 4-4, 4-6, 5-3, 5-4, 6-4 and 6-5, a=0.5. d tolerance is the value after press fitting into ring gauge of d�0.002. *1 Housing diameters and shaft diameters listed here are recommended dimensions. I.D. Tolerance is guaranteed value after press fit. |