We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI JZB6-10, call FAMAGA, the world's chief distributor of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of items and particular attention to each client. We value everyone, who liased with us - therefore, our regular customers pick up the most desirable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4500 such customers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Colombia, Tunisia, Slovenia, South Sudan, Suriname, Mali, Comoros, Rwanda, Croatia, Panama, Senegal, Estonia, Afghanistan, The Gambia, Kenya, Madagascar, India, Qatar, Belarus, Mozambique, United Arab Emirates, Denmark, Albania, Burkina Faso, Thailand, The Bahamas, North Korea, Djibouti, Luxembourg, Tanzania, Haiti, Brazil, Dominica, Belize, East Timor, Niger, Nepal, Yemen, Serbia, Guatemala, Bolivia, Benin. A advanced logistics bond and a partnership network guide us to send our products anywhere in the planet on-time without compromising product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as stay in control.
To consult or place an order, phone us or send a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | - | L |
JZB10 | - | 12 |
Part Number | L | D | Chamfer | *1 Housing Dia. | *1 Shaft Diameter | ||||||||||||||||||
Type | d (Tolerance after press fitting) | a | b | Ref. Dim. | Tolerance (H7) | Ref. Dim. | Tolerance (H7) | ||||||||||||||||
Straight JZB | 3 | +0.080 +0.030 | 3 | 4 | 5 | 5 | +0.107 +0.032 | 1* | C0.3 | 5 | + 0.012 0 | 3 | 0 - 0.010 | ||||||||||
4 | +0.095 +0.045 | 3 | 4 | 5 | 6 | 6 | +0.107 +0.032 | 1* | C0.3 | 6 | + 0.012 0 | 4 | 0 - 0.012 | ||||||||||
5 | +0.095 +0.045 | 3 | 4 | 5 | 6 | 8 | 7 | +0.157 +0.045 | 1* | C0.3 | 7 | + 0.015 0 | 5 | 0 - 0.012 | |||||||||
6 | +0.095 +0.045 | 4 | 5 | 6 | 8 | 10 | 8 | +0.157 +0.045 | 1* | C0.3 | 8 | + 0.015 0 | 6 | 0 - 0.012 | |||||||||
8 | +0.120 +0.060 | 5 | 6 | 8 | 10 | 12 | 15 | 10 | +0.157 +0.045 | 1 | C0.3 | 10 | + 0.015 0 | 8 | 0 - 0.015 | ||||||||
10 | +0.120 +0.060 | 6 | 8 | 10 | 12 | 15 | 20 | 12 | +0.193 +0.058 | 1 | C0.3 | 12 | + 0.018 0 | 10 | 0 - 0.015 | ||||||||
12 | +0.120 +0.060 | 8 | 10 | 12 | 15 | 20 | 14 | +0.193 +0.058 | 1 | R0.4 | 14 | + 0.018 0 | 12 | 0 - 0.018 | |||||||||
15 | +0.120 +0.060 | 10 | 12 | 15 | 20 | 25 | 17 | +0.193 +0.058 | 1 | R0.4 | 17 | + 0.018 0 | 15 | 0 - 0.018 | |||||||||
16 | +0.120 +0.060 | 10 | 12 | 15 | 20 | 25 | 18 | +0.193 +0.058 | 1 | R0.4 | 18 | + 0.018 0 | 16 | 0 - 0.018 | |||||||||
18 | +0.120 +0.060 | 12 | 15 | 20 | 25 | 30 | 20 | +0.221 +0.071 | 1 | R0.4 | 20 | + 0.021 0 | 18 | 0 - 0.018 | |||||||||
20 | +0.145 +0.075 | 15 | 20 | 25 | 30 | 23 | +0.221 +0.071 | 1 | R0.4 | 23 | + 0.021 0 | 20 | 0 - 0.021 | ||||||||||
22 | +0.145 +0.075 | 20 | 30 | 25 | +0.231 +0.081 | 1 | R0.4 | 25 | + 0.021 0 | 22 | 0 - 0.021 | ||||||||||||
25 | +0.170 +0.090 | 20 | 25 | 30 | 28 | +0.231 +0.081 | 1 | R0.4 | 28 | + 0.021 0 | 25 | 0 - 0.021 | |||||||||||
30 | +0.170 +0.090 | 20 | 25 | 30 | 40 | 34 | +0.290 +0.095 | 1 | R0.4 | 34 | + 0.025 0 | 30 | 0 - 0.021 | ||||||||||
35 | +0.215 +0.115 | 25 | 30 | 40 | 39 | +0.290 +0.095 | 1 | R0.4 | 39 | + 0.025 0 | 35 | 0 - 0.025 | |||||||||||
40 | +0.215 +0.115 | 30 | 40 | 50 | 44 | +0.340 +0.115 | 2 | R0.6 | 44 | + 0.025 0 | 40 | 0 - 0.025 | |||||||||||
50 | +0.235 +0.135 | 30 | 40 | 50 | 55 | +0.430 +0.130 | 2 | R0.8 | 55 | + 0.030 0 | 50 | 0 - 0.025 | |||||||||||
* When selecting 3-3, 3-4, 4-3, 4-4, 4-6, 5-3, 5-4, 6-4 and 6-5, a=0.5. d tolerance is the value after press fitting into ring gauge of d�0.002. *1 Housing diameters and shaft diameters listed here are recommended dimensions. I.D. Tolerance is guaranteed value after press fit. |