We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APSSPA13-A[10-100/1]
Description
[NAAMS] Locating Pin APS Small Head
Stock availability:
On request
If you are questing MISUMI APSSPA13-A[10-100/1], reach FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and personalseparate attention to each client. We value everyone, who conspired with us - thus, our regular clients procure the most acceptable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, The Bahamas, Togo, Nicaragua, Kuwait, Estonia, Sweden, Afghanistan, Canada, Morocco, Guinea, Comoros, Bulgaria, Georgia, Monaco, Honduras, Norway, Singapore, Romania, Chad, Finland, Belize, Japan, El Salvador, Peru, Sudan, Ireland, Malaysia, Tonga, Samoa, Seychelles, Uganda, The Gambia, Kiribati, Benin, Burkina Faso, South Korea, Moldova, Uruguay, Bolivia, Greece, Serbia, Bosnia and Herzegovina, Luxembourg, Nigeria, Mauritius, Andorra, Dominica, Eswatini. A well-built logistics series and a partnership network allow us to dispatch our elements anywhere in the planet with no delay without damaging product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are proud that users choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, contact us or write to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APS | Standard NAAMS | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APSS | A Configurable | P -Plain T -TiN |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | D DIA | A Lead Length | Coating | |||
APS | 08 | 4M | ||||
APS | 19 | 2M | T |
Part Number | A | |||||||
Type | Coating | Tip Shape | D Head DIA | |||||
APSS | P | B | 16 | - | A95 | |||
APSS | T | A | 08 | - | A25 |
Type | D Head Dia Callout (Actual) | A Lead Length | Coating | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | |||||
APS (Hole -0.15) | 06 (5.85) | 1M | 2M | 3M | 4M | 5M | 6M | - | - | - | - | None - Plain T- TiN | 1.0 | 18.0 |
08 (7.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | - | - | 1.0 | 24.0 | ||
10 (9.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 2.0 | 30.0 | ||
12 (11.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 2.0 | 36.0 | ||
13 (12.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 2.0 | 39.0 | ||
16 (15.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 2.0 | 48.0 | ||
19 (18.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 2.0 | 38.0 |
Type | Coating | Tip Shape | D Dia. Callout | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||
APSS (Hole - 0.15) | P- Plain T- TiN | A B C | 06 (5.85) | 10 ~ 60 | 1.0 | 18.0 | 9.0 | D/2 |
08 (7.85) | 10 ~ 80 | 24.0 | 12.0 | D/2 | ||||
10 (9.85) | 10 ~ 100 | 2.0 | 30.0 | 15.0 | D/2 | |||
12 (11.85) | 36.0 | 18.0 | D/2 | |||||
13 (12.85) | 39.0 | 19.5 | D/2 | |||||
16 (15.85) | 48.0 | 24.0 | D/2 | |||||
19 (18.85) | 38.0 | 19.0 | D/2 |