We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APQSTC13-A[10-100/1]
Description
[NAAMS] Locating Pin APQ Small Head
Stock availability:
On request
If you are questing MISUMI APQSTC13-A[10-100/1], reach FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and personalseparate attention to each consumer. We value everyone, who engaged with us - thus, our regular clients bring in the most acceptable purchase forms and discounts on the manufacturing equipment market. Today, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Malta, Oman, Croatia, Austria, Burkina Faso, Guinea, Papua New Guinea, Luxembourg, Palestine, Swaziland, Colombia, The Gambia, Liberia, Burma, Canada, Eritrea, Grenada, Costa Rica, Nicaragua, Philippines, South Sudan, North Korea, Chad, Laos, Djibouti, China, Finland, Israel, Azerbaijan, Mexico, Thailand, Nepal, Madagascar, United States, Tunisia, Ireland, Afghanistan, Kiribati, Mozambique, Togo, Benin, Bolivia, Guatemala. A well-built logistics network and a partnership network guide us to dispatch our products anywhere in the planet immediately without damaging product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this bulk is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, contact us or send a message to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APQ | Standard NAAMS | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APQS | A Configurable | P -Plain T -TiN |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | D Head Dia | A Lead Length | Coating | |||
APQ | 8 | 4 | ||||
APQ | 18 | 2 | T |
Part Number | A | |||||||
Type | Coating | Tip Shape | D Head Dia | |||||
APQS | P | B | 16 | - | A42 | |||
APQS | T | A | 20 | - | A75 |
Type | D Head Dia. | A Lead Length | Coating | B Rad | C Rad | |||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | |||||
APQ (Hole- h6) | 08 | 1 | 2 | 3 | 4 | 5 | 6 | - | - | None - Plain T- TiN | 1.0 | 24.0 |
10 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 1.0 | 30.0 | ||
13 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 30.0 | ||
16 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 48.0 | ||
18 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 | ||
20 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 |
Type | Coating | Tip Shape | D Head Dia. | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||
APQS (Hole-h6) | P- Plain T- TiN | A B C | 08 | 10 ~ 80 | 1.0 | 24.0 | 12.0 | D/2 |
10 | 10 ~ 100 | 30.0 | 15.0 | D/2 | ||||
13 | 2.0 | 30.0 | 15.0 | D/2 | ||||
16 | 48.0 | 24.0 | D/2 | |||||
18 | 38.0 | 19.0 | D/2 | |||||
20 | 38.0 | 19.0 | D/2 |