We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APQSPC16-A[10-100/1]
Description
[NAAMS] Locating Pin APQ Small Head
Stock availability:
On request
If you are questing MISUMI APQSPC16-A[10-100/1], catch up with FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are represented in the quality of goods and personalseparate attention to each client. We admire everyone, who conspired with us - therefore, our regular clients procure the most favorable purchase forms and discounts on the factory-made equipment market. Today, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Switzerland, Uzbekistan, Kenya, Kuwait, Kazakhstan, The Bahamas, Namibia, Eritrea, Bangladesh, Chad, Denmark, El Salvador, Monaco, Gambia, Azerbaijan, Nicaragua, Malawi, Tunisia, Norway, Malta, Bolivia, Russia, Ireland, Zambia, Lithuania, Niger, Latvia, Philippines, Thailand, East Timor, Equatorial Guinea, New Zealand, Rwanda, United Arab Emirates, Kyrgyzstan, Iran, Finland, Bulgaria, Laos, Israel, Mongolia, Czech Republic. A well-built logistics series and a partnership network guide us to dispatch our products anywhere in the earth immediately without damaging product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or make a request, call us by phone or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APQ | Standard NAAMS | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APQS | A Configurable | P -Plain T -TiN |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | D Head Dia | A Lead Length | Coating | |||
APQ | 8 | 4 | ||||
APQ | 18 | 2 | T |
Part Number | A | |||||||
Type | Coating | Tip Shape | D Head Dia | |||||
APQS | P | B | 16 | - | A42 | |||
APQS | T | A | 20 | - | A75 |
Type | D Head Dia. | A Lead Length | Coating | B Rad | C Rad | |||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | |||||
APQ (Hole- h6) | 08 | 1 | 2 | 3 | 4 | 5 | 6 | - | - | None - Plain T- TiN | 1.0 | 24.0 |
10 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 1.0 | 30.0 | ||
13 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 30.0 | ||
16 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 48.0 | ||
18 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 | ||
20 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 38.0 |
Type | Coating | Tip Shape | D Head Dia. | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||
APQS (Hole-h6) | P- Plain T- TiN | A B C | 08 | 10 ~ 80 | 1.0 | 24.0 | 12.0 | D/2 |
10 | 10 ~ 100 | 30.0 | 15.0 | D/2 | ||||
13 | 2.0 | 30.0 | 15.0 | D/2 | ||||
16 | 48.0 | 24.0 | D/2 | |||||
18 | 38.0 | 19.0 | D/2 | |||||
20 | 38.0 | 19.0 | D/2 |