We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APQLPB35-A[10-100/1]
Description
[NAAMS] Locating Pin APQ Large Head
Stock availability:
On request
If you are questing MISUMI APQLPB35-A[10-100/1], communicate with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are symbolized in the quality of products and personalseparate attention to each orderer. We esteem everyone, who joined with us - thus, our regular clients obtain the most attractive purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Brazil, Vietnam, Guatemala, Zimbabwe, Tanzania, Indonesia, Romania, Dominican Republic, Tonga, Eritrea, Bahamas, Bhutan, Botswana, India, Eswatini, United Arab Emirates, Togo, Kenya, Serbia, Ireland, Albania, Niger, Kiribati, Netherlands, Turkey, Mexico, Afghanistan, Kuwait, Sierra Leone, Croatia, Laos, Russia, Malaysia, Cyprus, Dominica, Argentina, Syria, Tunisia, El Salvador, Austria, Angola, Jordan, Comoros, Sweden, Seychelles, East Timor. A well-built logistics connection and a partnership network guide us to dispatch our products anywhere in the planet immediately without damaging product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, contact us or send a message to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APQ | Standard NAAMS | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APQL | A Configurable | P -Plain T -TiN |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | D Head Dia. | A Lead Length Callout | Coating | |||
APQ | 25 | 4 | T | |||
APQ | 30 | 5 |
Part Number | A | |||||||
Type | Coating | Tip Shape | D Head Dia. | |||||
APQL | P | A | 25 | - | A42 | |||
APQL | T | B | 30 | - | A65 |
Type | D Head Dia. | A Lead Length | Coating | B Rad | C Rad | |||||||
15mm | 20mm | 30mm | 40mm | 50mm | 60mm | 70mm | 80mm | |||||
APQ (Hole- h6) | 25 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | None- Plain T- TiN | 2.0 | 50.0 |
30 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | ||
35 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 | ||
40 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 2.0 | 50.0 |
Type | Coating | Tip Shape | D Head Dia. | A Lead Length (1 mm Inc.) | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||
APQL (Hole- h6) | P- Plain T- TiN | A B C | 25 | 10 ~ 100 | 2.0 | 50.0 | 25.0 | D/2 |
30 | 50.0 | 25.0 | D/2 | |||||
35 | 50.0 | 25.0 | D/2 | |||||
40 | 50.0 | 25.0 | D/2 |