We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
APESTB13-A[15-100/1]
Description
[NAAMS] Locating Pin APE Small Head
Stock availability:
On request
If you are pursuing MISUMI APESTB13-A[15-100/1], reach FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and special attention to each buyer. We value everyone, who worked with us - so, our regular consumers bring in the most convenient purchase terms and discounts on the factory-made equipment market. Today, there are more than 3500 such customers, and we constantly compose new agreements. More than 750 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Benin, Panama, Paraguay, Portugal, Zimbabwe, Vietnam, Qatar, Senegal, Papua New Guinea, The Bahamas, Kenya, Canada, Monaco, Mauritania, Brunei, Turkey, Suriname, Cape Verde, Slovakia, Netherlands, Kazakhstan, South Korea, Indonesia, Guyana, Guatemala, Chad, Mauritius, Algeria, Nicaragua, Andorra, Mexico, Costa Rica, Namibia, Ireland, Samoa, United Arab Emirates, Morocco, Bolivia, Tunisia, Pakistan, Botswana, Philippines, Estonia, Croatia, Finland. A well-elaborated logistics chains and a partnership network assist us to dispatch our products anywhere in the planet immediately without damaging product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been provided, and this amount is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as to stay on the top.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Head Tip
|
Type | Surface Treatment | Material | Hardness | |
APE | Standard NAAMS | None -Plain T -TiN | 1.6523 equiv. | Carburized 58 ~ 62HRC (Depth 0.5-0.7 after Grinding) |
APES | A Configurable | P -Plain T -TiN |
Dimension | Tol. | Finish | Geometric | |
0.0 | �0.3 | 6.0μm | 0.015 T.I.R to Datum A & B | |
0.00 | �0.03 | 3.0μm | ||
0.000 | �0.015 | 1.6μm | 0.03 T.I.R |
Part Number | ||||||
Type | E Flat Callout | A Lead Length Callout | Coating | |||
APE | 19 | 4M | ||||
APE | 12 | 2M | T |
Part Number | A | |||||||
Type | Coating | Tip Shape | E Flat Callout | |||||
APES | P | A | 19 | - | A42 | |||
APES | TC | C | 06 | - | A15 |
Type | E Flat Callout (Actual) | A Lead Length | Coating | For Slot | D Diameter | B Rad | C Rad | |||||||||
15 mm | 20 mm | 30 mm | 40 mm | 50 mm | 60 mm | 70 mm | 80 mm | 90 mm | 100 mm | |||||||
APE (Slot - 0.15) | 06 (5.85) | 1M | 2M | 3M | 4M | 5M | 6M | - | - | - | - | None- Plain T- TiN | 6x12 | 7.09 | 1.0 | 18.0 |
08 (7.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | - | - | 8x14 | 8.81 | 1.0 | 24.0 | ||
10 (9.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 10x16 | 10.63 | 2.0 | 30.0 | ||
12 (11.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 12x18 | 12.50 | 2.0 | 36.0 | ||
13 (12.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 13x19 | 13.46 | 2.0 | 39.0 | ||
16 (15.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 16x22 | 16.35 | 2.0 | 48.0 | ||
19 (18.85) | 1M | 2M | 3M | 4M | 5M | 6M | 7M | 8M | 9M | 0M | 19x25 | 19.27 | 2.0 | 38.0 |
Type | Coating | Tip Shape | E Flat Callout (Actual) | A Lead Length (1 mm Inc.) | For Slot | D Diameter | B Rad | C Rad | ||
Tip A | Tip B | Tip C | ||||||||
APES (Slot-0.15) | P- Plain T- TiN | A B C | 06 (5.85) | 15 ~ 60 | 6x12 | 7.09 | 1.0 | 18.0 | 9.0 | D/2 |
08 (7.85) | 15 ~ 80 | 8x14 | 8.81 | 24.0 | 12.0 | D/2 | ||||
10 (9.85) | 15 ~ 100 | 10x16 | 10.63 | 2.0 | 30.0 | 15.0 | D/2 | |||
12 (11.85) | 12x18 | 12.50 | 36.0 | 18.0 | D/2 | |||||
13 (12.85) | 13x19 | 13.46 | 39.0 | 19.5 | D/2 | |||||
16 (15.85) | 16x22 | 16.35 | 48.0 | 24.0 | D/2 | |||||
19 (18.85) | 19x25 | 19.27 | 38.0 | 19.0 | D/2 |