We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
UMSWRT4-13
Description
Silicon Rubber Mold Bearings/Crown/with Threaded Shaft
Stock availability:
On request
If you are inspecting MISUMI UMSWRT4-13, reach FAMAGA, the world's dominant company of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of spare parts and special attention to each buyer. We appreciate everyone, who conspired with us - therefore, our regular customers get the most beneficial purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such consumers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Uganda, Mexico, Bhutan, Papua New Guinea, Peru, Dominican Republic, Cuba, Zambia, Portugal, Qatar, Nicaragua, Iceland, Panama, Tajikistan, Djibouti, Ukraine, Belarus, Syria, Dominica, Guyana, Finland, Monaco, Brunei, North Korea, Morocco, Croatia, Benin, Yemen, Bosnia and Herzegovina, Malta, South Sudan, Montenegro, Bolivia, Chile, Poland, Suriname, Iraq, Madagascar, Jamaica, Costa Rica, Albania. A well-developed logistics bond and a partnership network assist us to send our products anywhere in the earth immediately without discrediting product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Type | Material | Hardness | Color | Bearing | Shaft | ||
R Type | |||||||
Standard Threaded | Long Threaded | Material | Surface Treatment | ||||
UMBRH | UMBRT | Urethane | Shore A90 | Black | EN 1.3505 Equiv. | Free Cutting Steel | Electroless Nickel Plating |
UMSBRH | - | EN 1.4125 Equiv. | EN 1.4305 Equiv. | - | |||
UMBWRH | UMBWRT | White | EN 1.3505 Equiv. | Free Cutting Steel | Electroless Nickel Plating *1 | ||
UMSWRH | UMSWRT | EN 1.4125 Equiv. | EN 1.4305 Equiv. | - | |||
UMBGRH | - | Shore A70 | Black | EN 1.3505 Equiv. | Free Cutting Steel | Electroless Nickel Plating | |
UMBGWRH | - | White | EN 1.3505 Equiv. | Free Cutting Steel | Electroless Nickel Plating *1 | ||
SUMBRH | SUMBRT | Silicon Rubber | Shore A70 | Light Gray | EN 1.3505 Equiv. | Free Cutting Steel | Electroless Nickel Plating |
SUMSBRH | SUMSBRT | EN 1.4125 Equiv. | EN 1.4305 Equiv. | - | |||
UMBDRH | UMBDRT | Antistatic Urethane (Gray) | Shore A90 | Gray | EN 1.3505 Equiv. | Free Cutting Steel | Electroless Nickel Plating |
Item | Unit | UMBDRH • UMBDRT |
Specific Volume Resistivity | ? • cm | 2.1x108 |
Surface Resistivity | ? | 4.0x109 |
Part Number | - | D |
SUMBRH20 | - | 55 |
Part Number | D | M (Coarse) | F | Allowable Load N (kgf) | B | D1 | r (min.) | G | R | Used Bearing | |||||||
Type | d | Standard | Long | Urethane | Silicon | ||||||||||||
Shore A90 | Shore A70 | Shore A70 | |||||||||||||||
Standard Threaded UMBRH *UMSBRH UMBWRH UMSWRH UMBGRH UMBGWRH *SUMBRH SUMSBRH UMBDRH | Long Threaded UMBRT UMBWRT UMSWRT *SUMBRT SUMSBRT UMBDRT | 3 | 12 | M3 | 4 | 6 | 34 | (3.5) | 10 | (1) | 9.8(1) | 3 | 7 | 0.1 | 1.5 | 5 | W683ZZA |
*4 | 13 | M4 | 5 | 8 | 44 | (4.5) | 13 | (1.3) | 13 | (1.3) | 4 | 9 | 0.15 | W684AX50ZZ | |||
16 | 59 | (6) | 16 | (1.6) | 18 | (1.8) | 5 | 13 | 0.2 | 624ZZ | |||||||
*5 | 16 | 16 | (1.6) | 2.5 | WBC5-13ZZ | ||||||||||||
20 | 78 | (8) | 20 | (2) | 24 | (2.4) | 16 | 0.3 | 625ZZ | ||||||||
*6 | 20 | M6 | 8 | 12 | 23 | (2.3) | 15 | 0.2 | 696ZZ | ||||||||
28 | 157 | (16) | 44 | (4.5) | 47 | (4.8) | 6 | 19 | 0.3 | 626ZZ | |||||||
*8 | 28 | 176 | (18) | 42 | (4.3) | 7 | 22 | 4 | 608ZZ |
Part Number | D | M (Coarse) | F | Allowable Load N (kgf) | B | D1 | B1 | r (min.) | G | R | Used Bearing | |||||||
Type | d | Standard | Long | Urethane | Silicon | |||||||||||||
Shore A90 | Shore A70 | Shore A70 | ||||||||||||||||
Standard Threaded UMBRH UMSBRH UMBWRH UMSWRH UMBGRH UMBGWRH SUMBRH SUMSBRH UMBDRH | Long Threaded UMBRT UMBWRT UMSWRT SUMBRT SUMSBRT UMBDRT | 8 | 30 | M6 | 8 | 12 | 176(18) | 81 | (8.3) | 53 | (5.4) | 11 | 22 | 7 | 0.3 | 4 | 15 | 608ZZ |
10 | 30 | 94 | (9.6) | 26 | 8 | 5 | 6000ZZ | |||||||||||
40 | 274(28) | 136 | (13.9) | 82 | (8.4) | 30 | 9 | 0.6 | 6200ZZ | |||||||||
15 | 40 | M10 | 12 | 20 | 122 | (12.4) | 12 | 32 | 0.3 | 6002ZZ | ||||||||
45 | 343(35) | 109 | (11.1) | 103 | (10.5) | 15 | 35 | 11 | 0.6 | 6202ZZ | ||||||||
20 | 45 | 130 | (13.3) | 12 | 37 | 9 | 0.3 | 8 | 6904ZZ | |||||||||
55 | 490(50) | 225 | (22.9) | 147(15) | 18 | 47 | 14 | 1 | 20 | 6204ZZ | ||||||||
25 | 65 | 750(70) | 333 | (34) | 226(23) | 19 | 52 | 15 | 10 | 6205ZZ |