We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SXPHCQH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5]
Description
Small Diameter/Small Head
Stock availability:
On request
If you are looking for MISUMI SXPHCQH-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]-E[0.5-2.5/0.5], reach FAMAGA, the world's main company of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are depicted in the quality of outcomes and special attention to each customer. We respect everyone, who engaged with us - therefore, our regular customers receive the most convenient purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such customers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Bosnia and Herzegovina, Sweden, Cameroon, Dominica, Peru, Eritrea, Israel, South Korea, Chad, South Sudan, Macedonia, Honduras, Oman, Georgia, Uganda, Afghanistan, Ecuador, Jamaica, El Salvador, Grenada, Togo, Samoa, Vietnam, Denmark, Djibouti, Ireland, Philippines, Mauritania, The Bahamas, Uruguay, United Arab Emirates, Swaziland, East Timor, Syria, Ghana, Luxembourg, Senegal, Mauritius, Nepal, Finland, Seychelles, Guatemala, Haiti, Zimbabwe, Slovakia. A advanced logistics chains and a partnership network allow us to send our products anywhere in the world with no delay without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as to stay on the top.
To inquire or order, contact us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||
Sphere | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
SK95 (ISO-TC90 Equiv.) | 50~58HRC | SPKHT | SFSHT | SPSHT | STSHT | SXSHT | SFPHT | SPPHT | STPHT | SXPHT |
EN 1.4301 Equiv. | - | SPKHS | SFSHS | SPSHS | STSHS | SXSHS | SFPHS | SPPHS | STPHS | SXPHS |
EN 1.4125 Equiv. | 50~55HRC | - | SFSHC | SPSHC | STSHC | SXSHC | SHPHC | SPPHC | STPHC | SXPHC |
EN 1.2344 Equiv. (SR Parts Polished) | 40~52HRC | - | - | SPSHDG | - | - | - | - | - | - |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | SPSHSG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKHT | - | D2 | - | L5 |
Part Number | - | D | - | L | - | P | - | B | - | E | |
SPSHS SXSHT | - - | D1.5 D1.5 | - - | L10.0 L10.0 | - - | P0.9 P1.2 | - - | B1.5 B2.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | P | - | B | - | E | |||||
Type | D Tolerance | P Tolerance | |||||||||||||
SPPHT SXPHS | Q P | R P | - - | D1.50 D1.50 | - - | L10.1 L10.0 | - - | P0.95 P1.20 | - - | B5.3 B3.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | D | D dim. Tolerance | L Selection | P | P Dim. Tolerance | B | |||
SPKHT SPKHS | 2 | 0 -0.005 | 3 | 5 | 10 | 0.95 | 0 -0.01 | 2 | |
3 | 3 | 8 | 10 | 1.95 | 4 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | P 0.1mm Increment | P Dim. Tolerance | B 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFSHT SFSHS SFSHC | Sphere SPSHT SPSHS SPSHC SPSHDG SPSHSG | Taper R STSHT STSHS STSHC | Tapered SXSHT SXSHS SXSHC | 1.0~2.0 | 0 -0.005 | 3.0~20.0 | 0.9~1.9 (D>P) | 0 -0.01 | 1.5~10.0 (B-P/2≥1.0) | 0.5~2.5 | 0.2 |
2.1~3.0 | 1.9~2.9 (D>P) | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | E 0.5mm Increment | R | |||||
Type | D Tolerance | P Tolerance | |||||||||
Flat SFPHT SFPHS SFPHC | Sphere SPPHT SPPHS SPPHC | Taper R STPHT STPHS STPHC | Tapered SXPHT SXPHS SXPHC | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | 0.51~1.00 | 3.0~20.0 | 0.50~0.99 (D>P) | 1.5~5.0 (B-P/2≥1.0) | 0.5~2.5 | - |
1.01~2.00 | 0.50~1.99 (D>P) | 0.2 | |||||||||
1.5~10.0 (B-P/2≥1.0) | |||||||||||
2.01~3.00 | 1.00~2.99 (D>P) | 0.4 |