We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SVRL-MX28-[161-1959/1]
Description
Linear Guides for Medium Load
Stock availability:
On request
If you are looking for MISUMI SVRL-MX28-[161-1959/1], communicate with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are ages of experience, which are symbolized in the quality of outcomes and special attention to each purchaser. We appreciate everyone, who engaged with us - thus, our regular buyers pick up the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Botswana, Iraq, India, Peru, Lebanon, Croatia, Malaysia, Senegal, Bhutan, Sweden, Romania, Afghanistan, Costa Rica, Netherlands, Guatemala, Haiti, Denmark, Ghana, Liechtenstein, Egypt, Tonga, Guyana, Monaco, El Salvador, Ukraine, Burkina Faso, Zimbabwe, Estonia, Comoros, Russia, Serbia, Poland, Bulgaria, Indonesia, Belarus, United Arab Emirates, Mozambique, Kuwait, Kazakhstan, China, Slovakia, Samoa, Central African Republic, Syria, Benin. A well-elaborated logistics link and a partnership network allow us to ship our items anywhere in the world with no delay without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is rising every day. We are happy that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or make a request, get in touch with us or write to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Type | MX (Lubrication Units) | L Dimension | Material Hardness | ||||
1 block | 2 blocks | ||||||
Standard Grade | High Grade | Standard Grade | High Grade | ||||
Block Standard | SVR | SVRJ | SV2R | SV2RJ | Blank: None -MX: Provided | Selectable | Carbon Steel 58HRC~ |
SVRL | SVRLJ | SV2RL | SV2RLJ | Configurable | |||
Wide Block | Through Hole | SVW | - | SV2W | - | Selectable | |
SVWL | - | SV2WL | - | Configurable | |||
Tapped Hole | SVWT | - | SV2WT | - | Selectable | ||
SVWTL | - | SV2WTL | - | Configurable |
Part Number | - | L | |
SVR28 SVR-MX RVR RVR28 SVR28L SVR28G | - - - - - | 880 880 880 880 880 | (With Lubrication Units) (LTBC Plating) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Guide Rail Dimension | |||||||||||||||||||||
Type | MX | H | W | L1 | B | Sx? | L2 | K | T | Cb | Grease Fitting | H1 | W1 | W2 | Ca | Counterbored Hole | F | G | ||||||
Standard | MX | Mounting Hole | E | T1 | d1xd2xh | |||||||||||||||||||
Standard Block | (1 block) SVR SVRL SVRJ SVRLJ | (2 blocks) SV2R SV2RL SV2RJ SV2RLJ | Blank: None -MX: Provided | 24 | 100~1480 (160) | 34 | 41 | 50.6 | 26 | M4x7 | 25 | 20 | 7 | 0.85 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 9.5 | 0.5 | 3.5x6x4.5 | 60 | 20 |
28 | 160~1960 (220) | 42 | 47 | 56.6 | 32 | M5x8 | 27.6 | 22.5 | 7.5 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 11 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 48 | 59 | 68.6 | 35 | M6x9 | 37 | 26.5 | 8 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 12.5 | 0.8 | 7x11x9 | 60 | 20 | ||||
Wide Block | (1 block) SVW SVWL SVWT SVWTL | (2 blocks) SV2W SV2WL SV2WT SV2WTL | 24 | 100~1480 (160) | 52 | 41 | 50.6 | 41 | 4.5 (M5) | 25 | 20 | 7 | 0.5 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 18.5 | 0.5 | 3.5x6x4.5 | 60 | 20 | |
28 | 160~1960 (220) | 59 | 47 | 56.6 | 49 | 5.5 (M6) | 27.6 | 22.5 | 9 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 19.5 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 73 | 59 | 68.6 | 60 | 7 (M8) | 37 | 26.5 | 10 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 25 | 0.8 | 7x11x9 | 60 | 20 | ||||
L Dimension: Dimensions in ( ) are for 2-Block Type. Sx? Dimensions: Dimensions in ( ) are for Wide Block Tapped Hole. |
H | Selectable L | Unit Price | |||||
1 block | 2 blocks | ||||||
SVR | SVW | SVWT | SV2R | SV2W | SV2WT | ||
24 | 100 | - | - | - | |||
160 | |||||||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
*1120 | |||||||
*1240 | |||||||
*1360 | |||||||
*1480 | |||||||
28 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 | |||||||
33 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 |
H | Unit Price | |||||
1 block | 2 blocks | |||||
SVRL | SVWL | SVWTL | SV2RL | SV2WL | SV2WTL | |
24 | ||||||
28 | ||||||
33 |
H | Unit Price | |
1 block | 2 blocks | |
24 | ||
28 | ||
33 |