We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SV2WTL28-[221-1959/1]
Description
Linear Guides for Medium Load
Stock availability:
On request
If you are looking for MISUMI SV2WTL28-[221-1959/1], call FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are portrayed in the quality of products and special attention to each customer. We respect everyone, who collaborated with us - therefore, our regular consumers get the most helpful purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such buyers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Uganda, Indonesia, Iran, Vietnam, Papua New Guinea, Bhutan, Chile, Hungary, Saudi Arabia, Lebanon, Togo, Kiribati, Guinea, Romania, Croatia, Armenia, Algeria, Cameroon, Eswatini, Poland, Liechtenstein, Antigua and Barbuda, Finland, Iraq, Burkina Faso, Namibia, Afghanistan, Liberia, Cape Verde, Senegal, Qatar, El Salvador, Mali, Thailand, Ecuador, Bosnia and Herzegovina, Czech Republic, The Gambia, Kenya, Tonga, Montenegro, Zimbabwe, Uruguay, Iceland, Laos, Bangladesh. A well-built logistics network and a partnership network guide us to ship our items anywhere in the planet immediately without discrediting product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the direction of factory-made equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this quantity is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as stay in control.
To get some advice or book, call us by phone or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Type | MX (Lubrication Units) | L Dimension | Material Hardness | ||||
1 block | 2 blocks | ||||||
Standard Grade | High Grade | Standard Grade | High Grade | ||||
Block Standard | SVR | SVRJ | SV2R | SV2RJ | Blank: None -MX: Provided | Selectable | Carbon Steel 58HRC~ |
SVRL | SVRLJ | SV2RL | SV2RLJ | Configurable | |||
Wide Block | Through Hole | SVW | - | SV2W | - | Selectable | |
SVWL | - | SV2WL | - | Configurable | |||
Tapped Hole | SVWT | - | SV2WT | - | Selectable | ||
SVWTL | - | SV2WTL | - | Configurable |
Part Number | - | L | |
SVR28 SVR-MX RVR RVR28 SVR28L SVR28G | - - - - - | 880 880 880 880 880 | (With Lubrication Units) (LTBC Plating) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Guide Rail Dimension | |||||||||||||||||||||
Type | MX | H | W | L1 | B | Sx? | L2 | K | T | Cb | Grease Fitting | H1 | W1 | W2 | Ca | Counterbored Hole | F | G | ||||||
Standard | MX | Mounting Hole | E | T1 | d1xd2xh | |||||||||||||||||||
Standard Block | (1 block) SVR SVRL SVRJ SVRLJ | (2 blocks) SV2R SV2RL SV2RJ SV2RLJ | Blank: None -MX: Provided | 24 | 100~1480 (160) | 34 | 41 | 50.6 | 26 | M4x7 | 25 | 20 | 7 | 0.85 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 9.5 | 0.5 | 3.5x6x4.5 | 60 | 20 |
28 | 160~1960 (220) | 42 | 47 | 56.6 | 32 | M5x8 | 27.6 | 22.5 | 7.5 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 11 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 48 | 59 | 68.6 | 35 | M6x9 | 37 | 26.5 | 8 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 12.5 | 0.8 | 7x11x9 | 60 | 20 | ||||
Wide Block | (1 block) SVW SVWL SVWT SVWTL | (2 blocks) SV2W SV2WL SV2WT SV2WTL | 24 | 100~1480 (160) | 52 | 41 | 50.6 | 41 | 4.5 (M5) | 25 | 20 | 7 | 0.5 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 18.5 | 0.5 | 3.5x6x4.5 | 60 | 20 | |
28 | 160~1960 (220) | 59 | 47 | 56.6 | 49 | 5.5 (M6) | 27.6 | 22.5 | 9 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 19.5 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 73 | 59 | 68.6 | 60 | 7 (M8) | 37 | 26.5 | 10 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 25 | 0.8 | 7x11x9 | 60 | 20 | ||||
L Dimension: Dimensions in ( ) are for 2-Block Type. Sx? Dimensions: Dimensions in ( ) are for Wide Block Tapped Hole. |
H | Selectable L | Unit Price | |||||
1 block | 2 blocks | ||||||
SVR | SVW | SVWT | SV2R | SV2W | SV2WT | ||
24 | 100 | - | - | - | |||
160 | |||||||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
*1120 | |||||||
*1240 | |||||||
*1360 | |||||||
*1480 | |||||||
28 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 | |||||||
33 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 |
H | Unit Price | |||||
1 block | 2 blocks | |||||
SVRL | SVWL | SVWTL | SV2RL | SV2WL | SV2WTL | |
24 | ||||||
28 | ||||||
33 |
H | Unit Price | |
1 block | 2 blocks | |
24 | ||
28 | ||
33 |