We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
STSNT2-L[0-10/0.5]-P[1-4/0.1]-B[1-30/0.5]-H[2.1-7/0.1]-T[1-20/0.5]
Description
Small Diameter with Shoulder/Threaded Shank
Stock availability:
On request
If you are inspecting MISUMI STSNT2-L[0-10/0.5]-P[1-4/0.1]-B[1-30/0.5]-H[2.1-7/0.1]-T[1-20/0.5], call FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of products and particular attention to each consumer. We cherish everyone, who engaged with us - hence, our regular consumers pick up the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such clients, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Colombia, Lesotho, Nigeria, Iceland, Guinea, Italy, France, Mongolia, Kiribati, Swaziland, New Zealand, Pakistan, Sierra Leone, Indonesia, Algeria, Serbia, Greece, Bhutan, Iran, Andorra, Bangladesh, Bulgaria, Uruguay, Czech Republic, Cameroon, Jamaica, Norway, Argentina, Australia, Tonga, Kyrgyzstan, Burundi, Slovakia, Turkmenistan, Zambia, Yemen, Ecuador, Cyprus, Eswatini, Jordan, Montenegro, Denmark, Laos, Cape Verde, Sudan, Vietnam, North Korea, Poland, Paraguay, Macedonia. A well-built logistics network and a partnership network allow us to dispatch our units anywhere in the earth quickly without compromising product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as to stay on the top.
To get some advice or make a request, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||
Standard Tolerance | Tolerance Selection | |||||||
Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | ||
SK95 (ISO-TC90 Equiv.) | 50~58HRC | SFSNT | SPSNT | STSNT | SXSNT | - | SPPNT | STPNT |
EN 1.4301 Equiv. | - | SFSNS | SPSNS | STSNS | SXSNS | SFPNS | SPPNS | STPNS |
Part Number | - | L | - | P | - | B | - | H | - | T | - | E |
SPSNT3 | - | L3.5 | - | P2.5 | - | B10.5 | - | H4.2 | - | T5.5 | ||
SXPNSQR2 | - | L2.0 | - | P3.2 | - | B8.0 | - | H4.00 | - | T3.0 | - | E3.0 |
Part Number | D | D dim. Tolerance | L 0.5mm Increment | P 0.1mm Increment | P Dimension Tolerance | B 0.5mm Increment | H 0.1mm Increment | T 0.5mm Increment | E 0.5mm Increment (Taper only) | R | M | |||
Flat SFSNT SFSNS | Sphere SPSNT SPSNS | Taper R STSNS STSNT | Tapered SXSNT SXSNS | 2 | 0 -0.005 | 0 1.0~10.0 | 1.0~4.0 | 0 -0.01 | 1.0~30.0 | 2.1~7.0 | 1.0~20.0 | 0.5~5.0 | 0.2 | M2 |
3 | 1.5~6.0 | 3.1~8.0 | 0.3 | M3 | ||||||||||
4 | 2.0~7.0 | 4.1~9.0 | 0.4 | M4 |
Part Number | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | H 0.01mm Increment | T 0.1mm Increment | E 0.5mm Increment (Taper only) | R | ||||||||||||||||||||||
TYPE | D Tolerance | P Tolerance | D | ||||||||||||||||||||||||||
Flat SFPNS | Sphere SPPNT SPPNS | Taper R STPNT STPNS |
|
| 1 | 2.0~ 5.0 | 1.00~2.90 | 1.0~10.0 | 1.10~3.00 | 1.0~10.0 | 0.5~5.0 | 0.2 | |||||||||||||||||
2 | 4.0~10.0 | 1.00~4.00 | 1.0~30.0 | 2.10~7.00 | 1.0~20.0 | 0.2 | |||||||||||||||||||||||
3 | 6.0~10.0 | 1.50~6.00 | 3.10~8.00 | 0.3 | |||||||||||||||||||||||||
4 | 8.0~10.0 | 2.00~7.00 | 4.10~9.00 | 0.4 |