We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
STSNS4-L[0-10/0.5]-P[2-7/0.1]-B[1-30/0.5]-H[4.1-9/0.1]-T[1-20/0.5]
Description
Small Diameter with Shoulder/Threaded Shank
Stock availability:
On request
If you are pursuing MISUMI STSNS4-L[0-10/0.5]-P[2-7/0.1]-B[1-30/0.5]-H[4.1-9/0.1]-T[1-20/0.5], communicate with FAMAGA, the world's chief provider of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and special attention to each client. We esteem everyone, who conspired with us - so, our regular customers accept the most attractive purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 750 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, Lebanon, Italy, Luxembourg, Serbia, Oman, Portugal, Bahamas, Peru, China, Thailand, Suriname, Mali, Tajikistan, Bulgaria, Haiti, Mongolia, Pakistan, Singapore, Nepal, Cyprus, East Timor, Brunei, Sweden, Seychelles, Philippines, Cameroon, Switzerland, United States, Morocco, Qatar, Mozambique, Angola, Mauritania, Nicaragua, Finland, Turkey, Russia, Denmark, United Arab Emirates, The Gambia, Indonesia, Panama, Albania, Armenia, Mauritius, Norway, Malaysia, Kyrgyzstan, Mexico, Djibouti. A well-developed logistics series and a partnership network guide us to deliver our units anywhere in the planet with no delay without damaging product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this amount is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as keep on top of it.
To consult or order, contact us or write a message to the online chat on our site. You can also send a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||
Standard Tolerance | Tolerance Selection | |||||||
Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | ||
SK95 (ISO-TC90 Equiv.) | 50~58HRC | SFSNT | SPSNT | STSNT | SXSNT | - | SPPNT | STPNT |
EN 1.4301 Equiv. | - | SFSNS | SPSNS | STSNS | SXSNS | SFPNS | SPPNS | STPNS |
Part Number | - | L | - | P | - | B | - | H | - | T | - | E |
SPSNT3 | - | L3.5 | - | P2.5 | - | B10.5 | - | H4.2 | - | T5.5 | ||
SXPNSQR2 | - | L2.0 | - | P3.2 | - | B8.0 | - | H4.00 | - | T3.0 | - | E3.0 |
Part Number | D | D dim. Tolerance | L 0.5mm Increment | P 0.1mm Increment | P Dimension Tolerance | B 0.5mm Increment | H 0.1mm Increment | T 0.5mm Increment | E 0.5mm Increment (Taper only) | R | M | |||
Flat SFSNT SFSNS | Sphere SPSNT SPSNS | Taper R STSNS STSNT | Tapered SXSNT SXSNS | 2 | 0 -0.005 | 0 1.0~10.0 | 1.0~4.0 | 0 -0.01 | 1.0~30.0 | 2.1~7.0 | 1.0~20.0 | 0.5~5.0 | 0.2 | M2 |
3 | 1.5~6.0 | 3.1~8.0 | 0.3 | M3 | ||||||||||
4 | 2.0~7.0 | 4.1~9.0 | 0.4 | M4 |
Part Number | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | H 0.01mm Increment | T 0.1mm Increment | E 0.5mm Increment (Taper only) | R | ||||||||||||||||||||||
TYPE | D Tolerance | P Tolerance | D | ||||||||||||||||||||||||||
Flat SFPNS | Sphere SPPNT SPPNS | Taper R STPNT STPNS |
|
| 1 | 2.0~ 5.0 | 1.00~2.90 | 1.0~10.0 | 1.10~3.00 | 1.0~10.0 | 0.5~5.0 | 0.2 | |||||||||||||||||
2 | 4.0~10.0 | 1.00~4.00 | 1.0~30.0 | 2.10~7.00 | 1.0~20.0 | 0.2 | |||||||||||||||||||||||
3 | 6.0~10.0 | 1.50~6.00 | 3.10~8.00 | 0.3 | |||||||||||||||||||||||||
4 | 8.0~10.0 | 2.00~7.00 | 4.10~9.00 | 0.4 |