We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
STSHS-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1.5-10/0.5]
Description
Small Diameter/Small Head
Stock availability:
On request
If you are pursuing MISUMI STSHS-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1.5-10/0.5], catch up with FAMAGA, the world's dominant retailer of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of outputs and special attention to each user. We cherish everyone, who engaged with us - thus, our regular consumers get the most acceptable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such clients, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Oman, France, Laos, Zambia, Malawi, Bahamas, Lithuania, Nigeria, Morocco, Uganda, United States, Belgium, Swaziland, Bosnia and Herzegovina, Finland, Argentina, Saudi Arabia, Uruguay, Tanzania, Algeria, Thailand, Bangladesh, Austria, Tonga, Malaysia, Macedonia, Niger, Central African Republic, Eswatini, Paraguay, Tunisia, Israel, Ecuador, Mali, Nepal, Jordan, Vietnam, Kenya, Cameroon, Turkey, Norway, Greece, Serbia, Iraq, Togo, Denmark, Comoros, Ghana, Armenia. A well-developed logistics bond and a partnership network allow us to deliver our units anywhere in the earth on-time without compromising product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this amount is growing every day. We are proud that clients choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as keep on top of it.
To get some advice or order, get in touch with us or send a message to the online chat on our site. You can also forward a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||
Sphere | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
SK95 (ISO-TC90 Equiv.) | 50~58HRC | SPKHT | SFSHT | SPSHT | STSHT | SXSHT | SFPHT | SPPHT | STPHT | SXPHT |
EN 1.4301 Equiv. | - | SPKHS | SFSHS | SPSHS | STSHS | SXSHS | SFPHS | SPPHS | STPHS | SXPHS |
EN 1.4125 Equiv. | 50~55HRC | - | SFSHC | SPSHC | STSHC | SXSHC | SHPHC | SPPHC | STPHC | SXPHC |
EN 1.2344 Equiv. (SR Parts Polished) | 40~52HRC | - | - | SPSHDG | - | - | - | - | - | - |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | SPSHSG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKHT | - | D2 | - | L5 |
Part Number | - | D | - | L | - | P | - | B | - | E | |
SPSHS SXSHT | - - | D1.5 D1.5 | - - | L10.0 L10.0 | - - | P0.9 P1.2 | - - | B1.5 B2.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | P | - | B | - | E | |||||
Type | D Tolerance | P Tolerance | |||||||||||||
SPPHT SXPHS | Q P | R P | - - | D1.50 D1.50 | - - | L10.1 L10.0 | - - | P0.95 P1.20 | - - | B5.3 B3.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | D | D dim. Tolerance | L Selection | P | P Dim. Tolerance | B | |||
SPKHT SPKHS | 2 | 0 -0.005 | 3 | 5 | 10 | 0.95 | 0 -0.01 | 2 | |
3 | 3 | 8 | 10 | 1.95 | 4 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | P 0.1mm Increment | P Dim. Tolerance | B 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFSHT SFSHS SFSHC | Sphere SPSHT SPSHS SPSHC SPSHDG SPSHSG | Taper R STSHT STSHS STSHC | Tapered SXSHT SXSHS SXSHC | 1.0~2.0 | 0 -0.005 | 3.0~20.0 | 0.9~1.9 (D>P) | 0 -0.01 | 1.5~10.0 (B-P/2≥1.0) | 0.5~2.5 | 0.2 |
2.1~3.0 | 1.9~2.9 (D>P) | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | E 0.5mm Increment | R | |||||
Type | D Tolerance | P Tolerance | |||||||||
Flat SFPHT SFPHS SFPHC | Sphere SPPHT SPPHS SPPHC | Taper R STPHT STPHS STPHC | Tapered SXPHT SXPHS SXPHC | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | 0.51~1.00 | 3.0~20.0 | 0.50~0.99 (D>P) | 1.5~5.0 (B-P/2≥1.0) | 0.5~2.5 | - |
1.01~2.00 | 0.50~1.99 (D>P) | 0.2 | |||||||||
1.5~10.0 (B-P/2≥1.0) | |||||||||||
2.01~3.00 | 1.00~2.99 (D>P) | 0.4 |