We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
STPHTRR-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]
Description
Small Diameter/Small Head
Stock availability:
On request
If you are pursuing MISUMI STPHTRR-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1], catch up with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of outputs and special attention to each buyer. We cherish everyone, who joined with us - thus, our regular consumers bring in the most acceptable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such clients, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Bhutan, Finland, Canada, Liberia, New Zealand, Kiribati, Zambia, Guinea, Mali, Myanmar, Gambia, Israel, Mexico, Pakistan, Ecuador, Malawi, Azerbaijan, Algeria, South Korea, Hungary, Morocco, Tunisia, Guatemala, Bosnia and Herzegovina, Samoa, Equatorial Guinea, Serbia, Iran, Malaysia, Rwanda, Ireland, Denmark, Seychelles, Uruguay, Thailand, Greece, Ghana, Czech Republic, Cyprus, Kenya, Kuwait. A well-developed logistics network and a partnership network assist us to dispatch our items anywhere in the world immediately without compromising product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To consult or place an order, phone us or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||
Sphere | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
SK95 (ISO-TC90 Equiv.) | 50~58HRC | SPKHT | SFSHT | SPSHT | STSHT | SXSHT | SFPHT | SPPHT | STPHT | SXPHT |
EN 1.4301 Equiv. | - | SPKHS | SFSHS | SPSHS | STSHS | SXSHS | SFPHS | SPPHS | STPHS | SXPHS |
EN 1.4125 Equiv. | 50~55HRC | - | SFSHC | SPSHC | STSHC | SXSHC | SHPHC | SPPHC | STPHC | SXPHC |
EN 1.2344 Equiv. (SR Parts Polished) | 40~52HRC | - | - | SPSHDG | - | - | - | - | - | - |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | SPSHSG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKHT | - | D2 | - | L5 |
Part Number | - | D | - | L | - | P | - | B | - | E | |
SPSHS SXSHT | - - | D1.5 D1.5 | - - | L10.0 L10.0 | - - | P0.9 P1.2 | - - | B1.5 B2.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | P | - | B | - | E | |||||
Type | D Tolerance | P Tolerance | |||||||||||||
SPPHT SXPHS | Q P | R P | - - | D1.50 D1.50 | - - | L10.1 L10.0 | - - | P0.95 P1.20 | - - | B5.3 B3.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | D | D dim. Tolerance | L Selection | P | P Dim. Tolerance | B | |||
SPKHT SPKHS | 2 | 0 -0.005 | 3 | 5 | 10 | 0.95 | 0 -0.01 | 2 | |
3 | 3 | 8 | 10 | 1.95 | 4 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | P 0.1mm Increment | P Dim. Tolerance | B 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFSHT SFSHS SFSHC | Sphere SPSHT SPSHS SPSHC SPSHDG SPSHSG | Taper R STSHT STSHS STSHC | Tapered SXSHT SXSHS SXSHC | 1.0~2.0 | 0 -0.005 | 3.0~20.0 | 0.9~1.9 (D>P) | 0 -0.01 | 1.5~10.0 (B-P/2≥1.0) | 0.5~2.5 | 0.2 |
2.1~3.0 | 1.9~2.9 (D>P) | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | E 0.5mm Increment | R | |||||
Type | D Tolerance | P Tolerance | |||||||||
Flat SFPHT SFPHS SFPHC | Sphere SPPHT SPPHS SPPHC | Taper R STPHT STPHS STPHC | Tapered SXPHT SXPHS SXPHC | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | 0.51~1.00 | 3.0~20.0 | 0.50~0.99 (D>P) | 1.5~5.0 (B-P/2≥1.0) | 0.5~2.5 | - |
1.01~2.00 | 0.50~1.99 (D>P) | 0.2 | |||||||||
1.5~10.0 (B-P/2≥1.0) | |||||||||||
2.01~3.00 | 1.00~2.99 (D>P) | 0.4 |