We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SSELBL8L-[41-129/1]
Description
Miniature Linear Guides/Long Blocks/Light Preload
Stock availability:
On request
If you are seeking MISUMI SSELBL8L-[41-129/1], call FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of products and private attention to each consumer. We cherish everyone, who worked with us - hence, our regular buyers procure the most flexible purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such clients, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Congo, Spain, Cape Verde, Grenada, Burkina Faso, Niger, Papua New Guinea, Australia, Ghana, Thailand, Netherlands, North Korea, Iran, Paraguay, Kiribati, Brunei, Tanzania, Iceland, Malawi, Central African Republic, Liberia, Gambia, Greece, Lithuania, Mauritius, Indonesia, Ecuador, United Arab Emirates, Ukraine, Tonga, Uruguay, Nigeria, Hungary, Egypt, Eswatini, Ireland, Mali, Haiti, Cameroon, Austria. A well-shaped logistics chains and a partnership network allow us to deliver our goods anywhere in the planet with no delay without damaging product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All goods from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, call us by phone or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material Hardness | Type | MX (Lubrication Unit) | L Dimension | Number of Blocks | |||
Light Preload | Slight Clearance | ||||||
High Grade | Precision Grade | Standard Grade | |||||
Industry Standard Materials | Stainless Steel 56HRC~ | SSELB | SSELBV | SSELBZ | Blank: None -MX: Provided | Selectable | 1 |
SSEL2B | SSEL2BV | SSEL2BZ | 2 | ||||
SSELBL | SSELBLV | SSELBLZ | Configurable | 1 | |||
SSEL2BL | SSEL2BLV | SSEL2BLZ | 2 | ||||
Carbon Steel 58HRC~ | SELB | SELBV | SELBZ | - | Selectable | 1 | |
SEL2B | SEL2BV | SEL2BZ | 2 | ||||
SELBL | SELBLV | SELBLZ | Configurable | 1 | |||
SEL2BL | SEL2BLV | SEL2BLZ | 2 |
Part Number | - | L | |
SSELB10 SSELB-MX10 RSELB10 SSELB10L SSELB10G | - - - - - | 275 275 75 75 75 | (With Lubrication Unit) (LTBC Plating) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Guide Rail Dimension | |||||||||||||||
Type | MX | H | W | L1 | B | C | Sx? | L2 | K | Cb | W1 | W2 | H1 | Ca | Counterbored Hole | F | G | |
d1xd2xh | ||||||||||||||||||
Dimensions in ( ) are for 2-Block Type. | - | 6 | 40~100 (70) | 12 | 21 | 8 | - | M2x1.5 | 13.3 | 4.5 | 0.3 | 5 | 3.5 | 4 | 0.3 | 2.4x3.5x1 | 15 | 5 |
Stainless Steel Industry Standard Specifications SSELB SSEL2B SSELBL SSEL2BL Carbon Steel SELB SEL2B SELBL SEL2BL | SSELBV SSEL2BV SSELBLV SSEL2BLV SELBV SEL2BV SELBLV SEL2BLV | SSELBZ SSEL2BZ SSELBLZ SSEL2BLZ SELBZ SEL2BZ SELBLZ SEL2BLZ | ||||||||||||||||
8 | 40~130 (85) | 17 | 32 | 12 | 13 | M2x2.5 | 22 | 6.5 | 0.3 | 7 | 5 | 4.7 | 0.3 | 2.4x4.2x2.3 | 15 | 5 | ||
Blank: None -MX: Provided (for stainless steel only) | 10 | 55~275 (95) | 20 | 40 | 15 | 16 | M3x3 | 29 | 7.8 | 0.3 | 9 | 5.5 | 5.5 | 0.3 | 3.5x6x3.5 | 20 | 7.5 | |
13 | 70~470 (120) | 27 | 45.8 | 20 | 20 | M3x3.5 | 31.8 | 10 | 0.5 | 12 | 7.5 | 7.5 | 0.5 | 3.5x6x4.5 | 25 | 10 | ||
16 | 110~670 (150) | 32 | 58.3 | 25 | 25 | M3x4 | 43.3 | 12 | 0.5 | 15 | 8.5 | 9.5 | 0.5 | 3.5x6x4.5 | 40 | 15 | ||
20 | 160~700 (220) | 40 | 67.7 | 30 | 30 | M4x6 | 52.3 | 15 | 0.5 | 20 | 10 | 11 | 0.5 | 6x9.5x5.5 | 60 | 20 |