We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SPSHC-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1.5-10/0.5]
Description
Small Diameter/Small Head
Stock availability:
On request
If you are inspecting MISUMI SPSHC-D[1-3/0.1]-L[3-20/0.5]-P[0.9-2.9/0.1]-B[1.5-10/0.5], communicate with FAMAGA, the world's principle producer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and particular attention to each buyer. We value everyone, who joined with us - therefore, our regular clients bring in the most beneficial purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such buyers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Sri Lanka, Mexico, Andorra, Belgium, Romania, Mauritania, Slovenia, Sweden, Gambia, Bangladesh, Cape Verde, Colombia, Syria, Turkmenistan, Mozambique, Mali, Poland, Liberia, Latvia, Rwanda, Yemen, Belize, Comoros, Iceland, Djibouti, Benin, Turkey, Chile, Angola, Israel, El Salvador, Namibia, Kuwait, Azerbaijan, Georgia, South Sudan, Indonesia, Bolivia, Brazil, United Arab Emirates, Slovakia, Guatemala, Philippines, Switzerland, Suriname. A well-built logistics network and a partnership network guide us to dispatch our goods anywhere in the planet promptly without disreputing product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To inquire or make a request, phone us or write a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||
Sphere | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
SK95 (ISO-TC90 Equiv.) | 50~58HRC | SPKHT | SFSHT | SPSHT | STSHT | SXSHT | SFPHT | SPPHT | STPHT | SXPHT |
EN 1.4301 Equiv. | - | SPKHS | SFSHS | SPSHS | STSHS | SXSHS | SFPHS | SPPHS | STPHS | SXPHS |
EN 1.4125 Equiv. | 50~55HRC | - | SFSHC | SPSHC | STSHC | SXSHC | SHPHC | SPPHC | STPHC | SXPHC |
EN 1.2344 Equiv. (SR Parts Polished) | 40~52HRC | - | - | SPSHDG | - | - | - | - | - | - |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | SPSHSG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKHT | - | D2 | - | L5 |
Part Number | - | D | - | L | - | P | - | B | - | E | |
SPSHS SXSHT | - - | D1.5 D1.5 | - - | L10.0 L10.0 | - - | P0.9 P1.2 | - - | B1.5 B2.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | P | - | B | - | E | |||||
Type | D Tolerance | P Tolerance | |||||||||||||
SPPHT SXPHS | Q P | R P | - - | D1.50 D1.50 | - - | L10.1 L10.0 | - - | P0.95 P1.20 | - - | B5.3 B3.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | D | D dim. Tolerance | L Selection | P | P Dim. Tolerance | B | |||
SPKHT SPKHS | 2 | 0 -0.005 | 3 | 5 | 10 | 0.95 | 0 -0.01 | 2 | |
3 | 3 | 8 | 10 | 1.95 | 4 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | P 0.1mm Increment | P Dim. Tolerance | B 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFSHT SFSHS SFSHC | Sphere SPSHT SPSHS SPSHC SPSHDG SPSHSG | Taper R STSHT STSHS STSHC | Tapered SXSHT SXSHS SXSHC | 1.0~2.0 | 0 -0.005 | 3.0~20.0 | 0.9~1.9 (D>P) | 0 -0.01 | 1.5~10.0 (B-P/2≥1.0) | 0.5~2.5 | 0.2 |
2.1~3.0 | 1.9~2.9 (D>P) | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | E 0.5mm Increment | R | |||||
Type | D Tolerance | P Tolerance | |||||||||
Flat SFPHT SFPHS SFPHC | Sphere SPPHT SPPHS SPPHC | Taper R STPHT STPHS STPHC | Tapered SXPHT SXPHS SXPHC | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | 0.51~1.00 | 3.0~20.0 | 0.50~0.99 (D>P) | 1.5~5.0 (B-P/2≥1.0) | 0.5~2.5 | - |
1.01~2.00 | 0.50~1.99 (D>P) | 0.2 | |||||||||
1.5~10.0 (B-P/2≥1.0) | |||||||||||
2.01~3.00 | 1.00~2.99 (D>P) | 0.4 |