We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SPPHCRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1]
Description
Small Diameter/Small Head
Stock availability:
On request
If you are inspecting MISUMI SPPHCRP-D[1.01-3/0.01]-L[3-20/0.1]-P[0.5-2.99/0.01]-B[1.5-10/0.1], call FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and particular attention to each client. We admire everyone, who worked with us - thus, our regular clients accept the most helpful purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such buyers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Malaysia, Tunisia, Chad, Antigua and Barbuda, East Timor, France, Guatemala, Rwanda, Fiji, Mexico, Laos, Guinea, Niger, Latvia, Azerbaijan, Denmark, Iceland, Yemen, Ukraine, Turkmenistan, Japan, Cameroon, Lithuania, Tanzania, Norway, Thailand, Turkey, Andorra, Brazil, Indonesia, Australia, Bulgaria, Argentina, Bosnia and Herzegovina, Macedonia, Algeria, Armenia, India, Uruguay, Sierra Leone, Comoros. A well-built logistics link and a partnership network assist us to conduct our items anywhere in the world immediately without disreputing product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To get some advice or place an order, phone us or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||
Sphere | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
SK95 (ISO-TC90 Equiv.) | 50~58HRC | SPKHT | SFSHT | SPSHT | STSHT | SXSHT | SFPHT | SPPHT | STPHT | SXPHT |
EN 1.4301 Equiv. | - | SPKHS | SFSHS | SPSHS | STSHS | SXSHS | SFPHS | SPPHS | STPHS | SXPHS |
EN 1.4125 Equiv. | 50~55HRC | - | SFSHC | SPSHC | STSHC | SXSHC | SHPHC | SPPHC | STPHC | SXPHC |
EN 1.2344 Equiv. (SR Parts Polished) | 40~52HRC | - | - | SPSHDG | - | - | - | - | - | - |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | SPSHSG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKHT | - | D2 | - | L5 |
Part Number | - | D | - | L | - | P | - | B | - | E | |
SPSHS SXSHT | - - | D1.5 D1.5 | - - | L10.0 L10.0 | - - | P0.9 P1.2 | - - | B1.5 B2.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | P | - | B | - | E | |||||
Type | D Tolerance | P Tolerance | |||||||||||||
SPPHT SXPHS | Q P | R P | - - | D1.50 D1.50 | - - | L10.1 L10.0 | - - | P0.95 P1.20 | - - | B5.3 B3.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | D | D dim. Tolerance | L Selection | P | P Dim. Tolerance | B | |||
SPKHT SPKHS | 2 | 0 -0.005 | 3 | 5 | 10 | 0.95 | 0 -0.01 | 2 | |
3 | 3 | 8 | 10 | 1.95 | 4 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | P 0.1mm Increment | P Dim. Tolerance | B 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFSHT SFSHS SFSHC | Sphere SPSHT SPSHS SPSHC SPSHDG SPSHSG | Taper R STSHT STSHS STSHC | Tapered SXSHT SXSHS SXSHC | 1.0~2.0 | 0 -0.005 | 3.0~20.0 | 0.9~1.9 (D>P) | 0 -0.01 | 1.5~10.0 (B-P/2≥1.0) | 0.5~2.5 | 0.2 |
2.1~3.0 | 1.9~2.9 (D>P) | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | E 0.5mm Increment | R | |||||
Type | D Tolerance | P Tolerance | |||||||||
Flat SFPHT SFPHS SFPHC | Sphere SPPHT SPPHS SPPHC | Taper R STPHT STPHS STPHC | Tapered SXPHT SXPHS SXPHC | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | P +0.005 0 Q �0.002 R 0 -0.005 H 0 -0.01 | 0.51~1.00 | 3.0~20.0 | 0.50~0.99 (D>P) | 1.5~5.0 (B-P/2≥1.0) | 0.5~2.5 | - |
1.01~2.00 | 0.50~1.99 (D>P) | 0.2 | |||||||||
1.5~10.0 (B-P/2≥1.0) | |||||||||||
2.01~3.00 | 1.00~2.99 (D>P) | 0.4 |