We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPPHPB12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1]
Description
Large Head/Tapered/Plastic Tip
Stock availability:
On request
If you are pursuing MISUMI SJPPHPB12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1], call FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each purchaser. We value everyone, who cooperated with us - hence, our regular consumers bring in the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Israel, Slovakia, Malawi, Uzbekistan, Brunei, Bangladesh, Albania, Georgia, Cuba, Belgium, Uganda, Nicaragua, Liberia, Guinea, Croatia, Australia, Malaysia, Sweden, Saudi Arabia, Cape Verde, Iraq, Mexico, New Zealand, Jordan, Argentina, Greece, Gambia, Brazil, Ecuador, Niger, Zimbabwe, Kiribati, Egypt, Czech Republic, Hungary, Armenia, Tonga, Andorra, Uruguay, Kenya, Iran, Algeria, Seychelles. A well-shaped logistics system and a partnership network help us to deliver our goods anywhere in the planet immediately without compromising product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All products from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this quantity is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or place an order, contact us or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Pin | Head | Type | D Tolerance and Shape Code | |
Material | Hardness | Plastic Material | |||
EN 1.2510 Equiv. | Treated Hardness: 60 ~ 63HRC | MC Nylon | JPPH | B (Press Fit, m6) PB (Press Fit, p6) TA (Tapped, g6) NA (Threaded, g6) | |
EN 1.4301 Equiv. | - | SJPPH | |||
EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | CJPPH |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | Shape | D | ||||||||
JPPH | B | 8 | - | P10.00 | - | L10 | - | B5.5 | ||
CJPPH | TA | 16 | - | P25.00 | - | L22 | - | B13.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | m | x | ? | Unit Price | ||||||
Type | Shape Code | D | D dim. Tolerance | EN 1.2510 Equiv. Hardened JPPHB JPPHPB | EN 1.4301 Equiv. SJPPHB SJPPHPB | EN 1.4125 Equiv. CJPPHB CJPPHPB | ||||||||
m6 | p6 | |||||||||||||
JPPH SJPPH CJPPH | B (m6) PB (p6) | ?5 | +0.012 +0.004 | +0.020 +0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 1 | 5 | 4 | 1 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | |||||||||||
?8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | ||||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | ||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | ||||||||||
16 | 17.00~25.00 | 16~32 | 3 | 6 | 5 | |||||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N � cm | ? | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHTA | EN 1.4301 Equiv. SJPPHTA | EN 1.4125 Equiv. CJPPHTA | ||||||||
JPPH SJPPH CJPPH | TA | ?5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 5 | 4 | M2 | - | 3 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | |||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | |||||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | |||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | M6 | 2803 | 9 | ||||||||
16 | 17.00~25.00 | 16~32 | 6 | 5 | ||||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N � cm | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHNA | EN 1.4301 Equiv. SJPPHNA | EN 1.4125 Equiv. CJPPHNA | |||||||
JPPH SJPPH CJPPH | NA | ?5 | -0.004 -0.012 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5 | 4 | M5 | 676 | |||
?6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | |||||||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | ||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | M12 | 9702 | ||||||||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 6 | 5 | M16 | 24108 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | M20 | 46942 |