We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPAMF8-[5-30/0.01]-[5-30/1]
Description
Height Adjust Pins/Press Fit/L Configurable
Stock availability:
On request
If you are looking for MISUMI SJPAMF8-[5-30/0.01]-[5-30/1], catch up with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are represented in the quality of goods and personalseparate attention to each purchaser. We admire everyone, who cooperated with us - thus, our regular purchasers accept the most acceptable purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the earth Germany, United Kingdom, San Marino, Bosnia and Herzegovina, Armenia, Zambia, Bhutan, Suriname, Lesotho, Egypt, Cyprus, Samoa, Burundi, Mongolia, Burkina Faso, Jordan, Tunisia, South Korea, Norway, Tonga, Yemen, Macedonia, Azerbaijan, Chad, Nicaragua, Denmark, Brazil, Equatorial Guinea, Uganda, Iraq, Sierra Leone, Laos, Bulgaria, Tajikistan, Antigua and Barbuda, Russia, Turkey, Rwanda, Kyrgyzstan, Nigeria, Kazakhstan, Cape Verde, Namibia, Andorra. A well-developed logistics network and a partnership network allow us to deliver our goods anywhere in the planet immediately without compromising product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as to stay on the top.
To inquire or make a request, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||
L Configurable | D and L Configurable | |||||
d dim. Tolerance p6 | d dim. Tolerance m6 | d dim. Tolerance p6 | d dim. Tolerance m6 | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPAT | JPAM | JPATF | JPAMF |
EN 1.2510 Equiv. | Black Oxide | Treated Hardness: 60 ~ 63HRC | BJPAT | BJPAM | BJPATF | BJPAMF |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3�m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | HJPAT | HJPAM | HJPATF | HJPAMF |
EN 1.4301 Equiv. | - | - | SJPAT | SJPAM | SJPATF | SJPAMF |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPAT | CJPAM | CJPATF | CJPAMF |
Part Number | - | L | |
JPAT8 JPHU3 | - - | 15.00 10.00 | (Press Fit, L Configurable) (Counterbored, L Configurable) |
Part Number | - | L | - | D | |
JPATF8 JPHUZ5 | - - | 15.00 10.00 | - - | 12 20 | (Press Fit, D and L Configurable) (Counterbore, D and L Configurable) |
Part Number | L 0.01mm Increment | D | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPAT JPAM | BJPAT BJPAM | HJPAT HJPAM | SJPAT SJPAM | CJPAT CJPAM | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPAT BJPAT HJPAT SJPAT CJPAT | d dim. Tolerance m6 JPAM BJPAM HJPAM SJPAM CJPAM | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 6 | 5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 8 | 6 | ||||||||
5 | 10 | 8 | ||||||||||
6 | 5.00~30.00 | 12 | ||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 16 | 10 | ||||||||
10 | 10.00~50.00 | 18 | 12 | |||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 20 | 15 |
Part Number | L 0.01mm Increment | D 1mm Increment | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPATF JPAMF | BJPATF BJPAMF | HJPATF HJPAMF | SJPATF SJPAMF | CJPATF CJPAMF | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPATF BJPATF HJPATF SJPATF CJPATF | d dim. Tolerance m6 JPAMF BJPAMF HJPAMF SJPAMF CJPAMF | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 5~30
(d5 | | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6 | |||||||||
5 | 8 | |||||||||||
6 | 5.00~30.00 | |||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 10 | |||||||||
10 | 10.00~50.00 | 12 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 15 |