We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPAMF12-[10-50/0.01]-[5-30/1]
Description
Height Adjust Pins/Press Fit/L Configurable
Stock availability:
On request
If you are looking for MISUMI SJPAMF12-[10-50/0.01]-[5-30/1], reach FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are outlined in the quality of merchandises and personalseparate attention to each client. We value everyone, who conspired with us - therefore, our regular purchasers get the most attractive purchase conditions and discounts on the industrial equipment market. Now, there are more than 4000 such customers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the planet Germany, United Kingdom, Lesotho, San Marino, Serbia, Pakistan, Eritrea, Uganda, Cuba, Hungary, Tanzania, Congo, Dominican Republic, Namibia, Georgia, Finland, Kyrgyzstan, Jamaica, Croatia, Czech Republic, Togo, Panama, Iran, Cape Verde, El Salvador, Ecuador, Vietnam, Mauritania, Zimbabwe, Mauritius, The Bahamas, Nicaragua, Samoa, Swaziland, South Sudan, Philippines, Jordan, Nepal, Seychelles, Comoros, Peru, Indonesia, Iceland, Ireland, United Arab Emirates. A well-developed logistics connection and a partnership network let us to send our goods anywhere in the earth with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To request or order, phone us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||
L Configurable | D and L Configurable | |||||
d dim. Tolerance p6 | d dim. Tolerance m6 | d dim. Tolerance p6 | d dim. Tolerance m6 | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPAT | JPAM | JPATF | JPAMF |
EN 1.2510 Equiv. | Black Oxide | Treated Hardness: 60 ~ 63HRC | BJPAT | BJPAM | BJPATF | BJPAMF |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3�m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | HJPAT | HJPAM | HJPATF | HJPAMF |
EN 1.4301 Equiv. | - | - | SJPAT | SJPAM | SJPATF | SJPAMF |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPAT | CJPAM | CJPATF | CJPAMF |
Part Number | - | L | |
JPAT8 JPHU3 | - - | 15.00 10.00 | (Press Fit, L Configurable) (Counterbored, L Configurable) |
Part Number | - | L | - | D | |
JPATF8 JPHUZ5 | - - | 15.00 10.00 | - - | 12 20 | (Press Fit, D and L Configurable) (Counterbore, D and L Configurable) |
Part Number | L 0.01mm Increment | D | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPAT JPAM | BJPAT BJPAM | HJPAT HJPAM | SJPAT SJPAM | CJPAT CJPAM | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPAT BJPAT HJPAT SJPAT CJPAT | d dim. Tolerance m6 JPAM BJPAM HJPAM SJPAM CJPAM | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 6 | 5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 8 | 6 | ||||||||
5 | 10 | 8 | ||||||||||
6 | 5.00~30.00 | 12 | ||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 16 | 10 | ||||||||
10 | 10.00~50.00 | 18 | 12 | |||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 20 | 15 |
Part Number | L 0.01mm Increment | D 1mm Increment | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPATF JPAMF | BJPATF BJPAMF | HJPATF HJPAMF | SJPATF SJPAMF | CJPATF CJPAMF | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPATF BJPATF HJPATF SJPATF CJPATF | d dim. Tolerance m6 JPAMF BJPAMF HJPAMF SJPAMF CJPAMF | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 5~30
(d5 | | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6 | |||||||||
5 | 8 | |||||||||||
6 | 5.00~30.00 | |||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 10 | |||||||||
10 | 10.00~50.00 | 12 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 15 |