We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPAM8-[5-30/0.01]
Description
Height Adjust Pins/Press Fit/L Configurable
Stock availability:
On request
If you are pursuing MISUMI SJPAM8-[5-30/0.01], communicate with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each orderer. We value everyone, who joined with us - so, our regular buyers pick up the most convenient purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 3500 such buyers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Portugal, Guinea-Bissau, Peru, Botswana, Netherlands, Bangladesh, Bahamas, Israel, Norway, France, Cuba, Argentina, Jamaica, Samoa, Czech Republic, Philippines, Malaysia, Libya, Djibouti, United Arab Emirates, Australia, Estonia, Angola, Belize, Switzerland, Belarus, Tajikistan, Costa Rica, Guyana, Fiji, Pakistan, Kuwait, Russia, Croatia, Antigua and Barbuda, Morocco, Comoros, Mexico, Albania, Brunei, Mongolia, Guatemala, Vietnam. A advanced logistics series and a partnership network assist us to dispatch our goods anywhere in the earth as soon as possible without undermining product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To get some advice or place an order, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||
L Configurable | D and L Configurable | |||||
d dim. Tolerance p6 | d dim. Tolerance m6 | d dim. Tolerance p6 | d dim. Tolerance m6 | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPAT | JPAM | JPATF | JPAMF |
EN 1.2510 Equiv. | Black Oxide | Treated Hardness: 60 ~ 63HRC | BJPAT | BJPAM | BJPATF | BJPAMF |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3�m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | HJPAT | HJPAM | HJPATF | HJPAMF |
EN 1.4301 Equiv. | - | - | SJPAT | SJPAM | SJPATF | SJPAMF |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPAT | CJPAM | CJPATF | CJPAMF |
Part Number | - | L | |
JPAT8 JPHU3 | - - | 15.00 10.00 | (Press Fit, L Configurable) (Counterbored, L Configurable) |
Part Number | - | L | - | D | |
JPATF8 JPHUZ5 | - - | 15.00 10.00 | - - | 12 20 | (Press Fit, D and L Configurable) (Counterbore, D and L Configurable) |
Part Number | L 0.01mm Increment | D | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPAT JPAM | BJPAT BJPAM | HJPAT HJPAM | SJPAT SJPAM | CJPAT CJPAM | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPAT BJPAT HJPAT SJPAT CJPAT | d dim. Tolerance m6 JPAM BJPAM HJPAM SJPAM CJPAM | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 6 | 5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 8 | 6 | ||||||||
5 | 10 | 8 | ||||||||||
6 | 5.00~30.00 | 12 | ||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 16 | 10 | ||||||||
10 | 10.00~50.00 | 18 | 12 | |||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 20 | 15 |
Part Number | L 0.01mm Increment | D 1mm Increment | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPATF JPAMF | BJPATF BJPAMF | HJPATF HJPAMF | SJPATF SJPAMF | CJPATF CJPAMF | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPATF BJPATF HJPATF SJPATF CJPATF | d dim. Tolerance m6 JPAMF BJPAMF HJPAMF SJPAMF CJPAMF | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 5~30
(d5 | | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6 | |||||||||
5 | 8 | |||||||||||
6 | 5.00~30.00 | |||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 10 | |||||||||
10 | 10.00~50.00 | 12 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 15 |