We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPAM5-[2-10/0.01]
Description
Height Adjust Pins/Press Fit/L Configurable
Stock availability:
On request
If you are seeking MISUMI SJPAM5-[2-10/0.01], reach FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of items and private attention to each consumer. We respect everyone, who engaged with us - so, our regular consumers obtain the most beneficial purchase forms and discounts on the manufacturing equipment market. At present, there are more than 3500 such consumers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Congo, Sri Lanka, Albania, Benin, Sudan, Papua New Guinea, Rwanda, Kenya, Myanmar, Bahamas, Moldova, Philippines, Pakistan, Libya, Croatia, Qatar, Paraguay, China, Vietnam, New Zealand, Luxembourg, The Gambia, Burundi, Bolivia, Burkina Faso, Japan, Haiti, Nicaragua, South Sudan, Botswana, Nepal, El Salvador, Malaysia, Tunisia, Suriname, Mexico, Afghanistan, Finland, Yemen, Laos, Egypt, Switzerland. A well-developed logistics system and a partnership network cheer us to ship our units anywhere in the earth promptly without damaging product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that buyers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To request or place an order, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||
L Configurable | D and L Configurable | |||||
d dim. Tolerance p6 | d dim. Tolerance m6 | d dim. Tolerance p6 | d dim. Tolerance m6 | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPAT | JPAM | JPATF | JPAMF |
EN 1.2510 Equiv. | Black Oxide | Treated Hardness: 60 ~ 63HRC | BJPAT | BJPAM | BJPATF | BJPAMF |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3�m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | HJPAT | HJPAM | HJPATF | HJPAMF |
EN 1.4301 Equiv. | - | - | SJPAT | SJPAM | SJPATF | SJPAMF |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPAT | CJPAM | CJPATF | CJPAMF |
Part Number | - | L | |
JPAT8 JPHU3 | - - | 15.00 10.00 | (Press Fit, L Configurable) (Counterbored, L Configurable) |
Part Number | - | L | - | D | |
JPATF8 JPHUZ5 | - - | 15.00 10.00 | - - | 12 20 | (Press Fit, D and L Configurable) (Counterbore, D and L Configurable) |
Part Number | L 0.01mm Increment | D | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPAT JPAM | BJPAT BJPAM | HJPAT HJPAM | SJPAT SJPAM | CJPAT CJPAM | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPAT BJPAT HJPAT SJPAT CJPAT | d dim. Tolerance m6 JPAM BJPAM HJPAM SJPAM CJPAM | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 6 | 5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 8 | 6 | ||||||||
5 | 10 | 8 | ||||||||||
6 | 5.00~30.00 | 12 | ||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 16 | 10 | ||||||||
10 | 10.00~50.00 | 18 | 12 | |||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 20 | 15 |
Part Number | L 0.01mm Increment | D 1mm Increment | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPATF JPAMF | BJPATF BJPAMF | HJPATF HJPAMF | SJPATF SJPAMF | CJPATF CJPAMF | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPATF BJPATF HJPATF SJPATF CJPATF | d dim. Tolerance m6 JPAMF BJPAMF HJPAMF SJPAMF CJPAMF | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 5~30
(d5 | | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6 | |||||||||
5 | 8 | |||||||||||
6 | 5.00~30.00 | |||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 10 | |||||||||
10 | 10.00~50.00 | 12 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 15 |