We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
LSPHRCB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
Description
Support Pins/Tip Shape Selectable
Stock availability:
On request
If you are pursuing MISUMI LSPHRCB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1], call FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of items and special attention to each user. We appreciate everyone, who collaborated with us - hence, our regular consumers pick up the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such consumers, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Italy, Bhutan, Spain, Portugal, Belgium, Turkey, Palestine, Paraguay, Uruguay, Iceland, Mauritius, Canada, Gambia, Sweden, Sierra Leone, Liechtenstein, Mali, Grenada, South Sudan, Lithuania, Monaco, Iran, Brunei, Uganda, The Gambia, Brazil, Nicaragua, Czech Republic, Djibouti, Azerbaijan, Nepal, Hungary, Australia, Andorra, Mongolia, Laos, Panama, Bulgaria, Angola, Burundi, Mexico, Algeria, New Zealand, Armenia, India. A well-elaborated logistics series and a partnership network help us to dispatch our elements anywhere in the globe promptly without discrediting product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are happy that clients choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, call us by phone or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Threaded | Tapped | Pilot |
EN 1.1191 Equiv. | Black Oxide | - | LSPC | LSPA | LSPB |
EN 1.1191 Equiv. | Hard Chrome Plating | - | LSPRC | LSPAR | LSPBR |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | LSPHBC | LSPAHB | LSPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating | Treated Hardness: 45 ~ 50HRC | LSPHRC | LSPAHR | LSPBHR |
EN 1.4301 Equiv. | - | - | LSPSUC | LSPASU | LSPBSU |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | LSPSCC | LSPASC | LSPBSC |
Part Number | - | L | - | P | - | B | - | E | - | A |
LSPCA10 | - | L20.01 | - | P4.05 | - | B5 | - | E2.0 | - | A15 |
LSPBC12 | - | L25.01 | - | P8.00 | - | B10 |
M (Coarse) | Tightening Torque N cm |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | ?1156 |
M8 | ?2803 |
M10 | ?5557 |
M12 | ?9702 |
M16 | 24108 |
M20 | 46942 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | B 0.1mm Increment | E 0.1mm Increment (Shape A only) | A Selection (Shape A only) | R (Shape C) | d | M (Coarse) | F | M1 (Coarse) | ?1 | W | ?2 | ||||
Type | Tip Shape | D | |||||||||||||||
Threaded LSPC LSPRC LSPHBC LSPHRC LSPSUC LSPSCC | Tapped LSPA LSPAR LSPAHB LSPAHR LSPASU LSPASC | Pilot LSPB LSPBR LSPBHB LSPBHR LSPBSU LSPBSC | A B C | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0.5~10.0 | 15 30 45 60 | 1 | 3 | 3 | 1.5 | M3 | - | 5 | 8 |
8 | 3.00~6.00 | 2.0~15.0 | 5 | 5 | 2 | 7 | |||||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 1.5 | 6 | 6 | 3 | 6 | 8 | ||||||||
12 | 4.00~10.00 | 2.0~20.0 | 8 | 8 | 4 | M5 | 10 | 10 | |||||||||
15 | 5.00~10.00 | 2.0~25.0 | 2 | 10 | 10 | 5 | 9 | 13 | |||||||||
20 | 8.00~15.00 | 2.0~30.0 | 3 | 12 | 12 | 5 | M8 | 17 | |||||||||
25 | 10.00~15.00 | 2.0~30.0 | 4 | 16 | 16 | 5 | 20 |