We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMTNH20-P[10-18/0.01]-MS10-L[0-25/1]-B[5-25/1]
Description
Slot Pins for Inspection Components/Threaded/Tapered
Stock availability:
On request
If you are looking for MISUMI KJPMTNH20-P[10-18/0.01]-MS10-L[0-25/1]-B[5-25/1], communicate with FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of items and individual attention to each consumer. We esteem everyone, who engaged with us - thus, our regular buyers obtain the most favorable purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4500 such clients, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, South Sudan, China, Estonia, Panama, Djibouti, Switzerland, Botswana, Kyrgyzstan, Morocco, Colombia, Bulgaria, Norway, United States, The Gambia, North Korea, Burkina Faso, Netherlands, Eritrea, Laos, Sweden, Iceland, Guyana, Montenegro, Benin, Bolivia, Angola, Seychelles, Nigeria, Tajikistan, Moldova, Syria, Malta, Cyprus, Russia, Poland, Equatorial Guinea, Haiti, Comoros, Zimbabwe, Bangladesh, Samoa, Mali. A advanced logistics connection and a partnership network help us to deliver our items anywhere in the planet quickly without damaging product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of factory-made equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as to stay on the top.
To inquire or book, contact us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material1 | Hardness | Taper Shape Fixed | Angle Selection | X dimension Configurable | Tapered, No Step | |
Type | Type | Type | Type | |||
S 0 -0.02 | Sg6 | S 0 -0.02 | S 0 -0.02 | |||
EN 1.1191 Equiv. | - | KJPMT | KJPGMT | KJPMK | KJPMX | KJPMTN |
EN 1.1191 Equiv. | 45HRC~ | KJPMTH | KJPGMTH | KJPMKH | KJPMXH | KJPMTNH |
EN 1.4301 Equiv. | - | KJPMTS | KJPGMTS | KJPMKS | KJPMXS | - |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMTC | KJPGMTC | KJPMKC | KJPMXC | - |
Part Number (TYPE, D) | - | P | - | S | - | M | - | B | - | C | |||||
KJPKDT16 | - | P10.00 | - | S8 | - | M5 | - | B15 | - | C10 | |||||
Part Number (TYPE, D) | - | P | - | S | - | M | - | L | - | B | - | K | - | X | |
Taper Shape Fixed Angle K Selectable X Dimension Selectable Tapered, No Step | KJPMT12L KJPMKH16 KJPMXH20 KJPMTN8 | - - - - | P14.20 P11.50 P12.50 P5.60 | - - - | S10 S8 S11 | - - - - | M5 M6 M8 M4 | - - - - | L15 L10 L13 L10 | - - - - | B10 B10 B18 B10 | - | K10 | - | X2 |
S | g6 |
4~6 | -0.004 -0.012 |
7~10 | -0.005 -0.014 |
11~18 | -0.006 -0.017 |
19~29 | -0.007 -0.020 |
Part Number | P 0.01mm Increment | S (P-1≥S) 1mm Increment | M (S≥M) Selection | 1mm Increment | X | Y1, Y2 | K | ||||||||||
S 0 -0.02 | Sg6 | D | L | B | |||||||||||||
(EN 1.1191 Equiv.) KJPMT (EN 1.1191 Equiv. Hardened) KJPMTH (EN 1.4301 Equiv.) KJPMTS (EN 1.4125 Equiv.) KJPMTC | (EN 1.1191 Equiv.) KJPGMT (EN 1.1191 Equiv. Hardened) KJPGMTH (EN 1.4301 Equiv.) KJPGMTS (EN 1.4125 Equiv.) KJPGMTC | 8 | 5.00~6.00 | 4~5 | 3 | 4 | 0~25 (L≤Sx3) When L=0, specify S as 0. | 5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2) | 5 | 1 | Tapered 1/5 | ||||||
10 | 5.00~8.00 | 4~7 | 4 | 5 | 6 | ||||||||||||
12 | 5.00~10.00 | 4~9 | 4 | 5 | 6 | 8 | |||||||||||
16 | 8.00~14.00 | 7~13 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||||
20 | 10.00~18.00 | 9~17 | 5 | 6 | 8 | 10 | S10 | 12 | |||||||||
25 | 15.00~23.00 | 14~19 | |||||||||||||||
10L | 10.00~16.00 | 5~15 | 4 | 5 | 6 | 8 | 10 | S10 | |||||||||
12L | 12.00~20.00 | 6~19 | 5 | 6 | 8 | 10 | S10 | 12 | |||||||||
16L | 16.00~25.00 | 8~24 | 6 | 8 | 10 | S10 | 12 | ||||||||||
20L | 20.00~30.00 | 10~29 |
Part Number | P 0.01mm Increment | S 1mm Increment | M (S≥M) Selection | 1mm Increment | K | X | Y1 | Y2 | Condition | ||||
Type | D | L | B | Selection | Fixed | Selection | Fixed | ||||||
S 0 -0.02 | |||||||||||||
Angle Selection | X Dimension Selectable | ||||||||||||
(EN 1.1191 Equiv.) KJPMK (EN 1.1191 Equiv. Hardened) KJPMKH (EN 1.4301 Equiv.) KJPMKS (EN 1.4125 Equiv.) KJPMKC | (EN 1.1191 Equiv.) KJPMX (EN 1.1191 Equiv. Hardened) KJPMXH (EN 1.4301 Equiv.) KJPMXS (EN 1.4125 Equiv.) KJPMXC | 10 | 5.21~7.59 | 4~5 | 4, 5, 6 8, 10, 12 (P≥M) | 0~25 (L≤Sx3) When L=0, specify S as 0. | 5~25 (M≤B≤Mx3) | 10 15 | 1 2 3 | Angle Selectable When K=10, 1.8 When K=15, 2.7 | Angle Selectable When K=10, S D>P+2.8 When K=15, S D>P+3.7 X Dim. Selectable When X=1, S D>P+2.8 When X=2, S D>P+2.6 When X=3, S D>P+2.4 | ||
12 | 5.21~9.59 | 4~7 | |||||||||||
16 | 8.00~13.59 | 4~11 | 1/5 | 5 | X Dim. Selectable | ||||||||
20 | 10.00~17.59 | 6~15 | When X=1, 1.8 When X=2, 1.6 When X=3, 1.4 | When X=1, 0.2 When X=2, 0.4 When X=3, 0.6 | |||||||||
25 | 15.00~22.59 | 8~19 |
Part Number | P 0.01mm Increment | M (P-1≥M) Selection | 1mm Increment | |||||||||
Type | D | |||||||||||
Tapered, No Step | L | B | ||||||||||
(EN 1.1191 Equiv.) KJPMTN (EN 1.1191 Equiv. Hardened) KJPMTNH | 8 | 5.00~6.00 | 3 | 4 | 3~25 (L≤(P-1)x3) | 5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2) | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | |||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | ||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
25 | 15.00~23.00 |