We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMTH16-P[8-14/0.01]-S[7-13/1]-MS10-L[0-25/1]-B[5-25/1]
Description
Slot Pins for Inspection Components/Threaded/Tapered
Stock availability:
On request
If you are inspecting MISUMI KJPMTH16-P[8-14/0.01]-S[7-13/1]-MS10-L[0-25/1]-B[5-25/1], call FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of outputs and private attention to each purchaser. We cherish everyone, who cooperated with us - therefore, our regular clients procure the most flexible purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, France, Kenya, Slovakia, Hungary, Greece, Niger, Argentina, Kazakhstan, Sweden, Canada, Belize, Tajikistan, Liberia, Benin, Montenegro, India, Peru, Australia, North Korea, Mozambique, Azerbaijan, South Korea, Zimbabwe, Ghana, Moldova, Kiribati, Georgia, Uganda, Burkina Faso, Indonesia, Malta, Serbia, Lithuania, Uruguay, Norway, Bangladesh, Ukraine, Eswatini, Paraguay, Afghanistan. A well-built logistics series and a partnership network cheer us to ship our units anywhere in the earth with no delay without discrediting product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this amount is increasing every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as to stay on the top.
To get some advice or make a request, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material1 | Hardness | Taper Shape Fixed | Angle Selection | X dimension Configurable | Tapered, No Step | |
Type | Type | Type | Type | |||
S 0 -0.02 | Sg6 | S 0 -0.02 | S 0 -0.02 | |||
EN 1.1191 Equiv. | - | KJPMT | KJPGMT | KJPMK | KJPMX | KJPMTN |
EN 1.1191 Equiv. | 45HRC~ | KJPMTH | KJPGMTH | KJPMKH | KJPMXH | KJPMTNH |
EN 1.4301 Equiv. | - | KJPMTS | KJPGMTS | KJPMKS | KJPMXS | - |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMTC | KJPGMTC | KJPMKC | KJPMXC | - |
Part Number (TYPE, D) | - | P | - | S | - | M | - | B | - | C | |||||
KJPKDT16 | - | P10.00 | - | S8 | - | M5 | - | B15 | - | C10 | |||||
Part Number (TYPE, D) | - | P | - | S | - | M | - | L | - | B | - | K | - | X | |
Taper Shape Fixed Angle K Selectable X Dimension Selectable Tapered, No Step | KJPMT12L KJPMKH16 KJPMXH20 KJPMTN8 | - - - - | P14.20 P11.50 P12.50 P5.60 | - - - | S10 S8 S11 | - - - - | M5 M6 M8 M4 | - - - - | L15 L10 L13 L10 | - - - - | B10 B10 B18 B10 | - | K10 | - | X2 |
S | g6 |
4~6 | -0.004 -0.012 |
7~10 | -0.005 -0.014 |
11~18 | -0.006 -0.017 |
19~29 | -0.007 -0.020 |
Part Number | P 0.01mm Increment | S (P-1≥S) 1mm Increment | M (S≥M) Selection | 1mm Increment | X | Y1, Y2 | K | ||||||||||
S 0 -0.02 | Sg6 | D | L | B | |||||||||||||
(EN 1.1191 Equiv.) KJPMT (EN 1.1191 Equiv. Hardened) KJPMTH (EN 1.4301 Equiv.) KJPMTS (EN 1.4125 Equiv.) KJPMTC | (EN 1.1191 Equiv.) KJPGMT (EN 1.1191 Equiv. Hardened) KJPGMTH (EN 1.4301 Equiv.) KJPGMTS (EN 1.4125 Equiv.) KJPGMTC | 8 | 5.00~6.00 | 4~5 | 3 | 4 | 0~25 (L≤Sx3) When L=0, specify S as 0. | 5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2) | 5 | 1 | Tapered 1/5 | ||||||
10 | 5.00~8.00 | 4~7 | 4 | 5 | 6 | ||||||||||||
12 | 5.00~10.00 | 4~9 | 4 | 5 | 6 | 8 | |||||||||||
16 | 8.00~14.00 | 7~13 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||||
20 | 10.00~18.00 | 9~17 | 5 | 6 | 8 | 10 | S10 | 12 | |||||||||
25 | 15.00~23.00 | 14~19 | |||||||||||||||
10L | 10.00~16.00 | 5~15 | 4 | 5 | 6 | 8 | 10 | S10 | |||||||||
12L | 12.00~20.00 | 6~19 | 5 | 6 | 8 | 10 | S10 | 12 | |||||||||
16L | 16.00~25.00 | 8~24 | 6 | 8 | 10 | S10 | 12 | ||||||||||
20L | 20.00~30.00 | 10~29 |
Part Number | P 0.01mm Increment | S 1mm Increment | M (S≥M) Selection | 1mm Increment | K | X | Y1 | Y2 | Condition | ||||
Type | D | L | B | Selection | Fixed | Selection | Fixed | ||||||
S 0 -0.02 | |||||||||||||
Angle Selection | X Dimension Selectable | ||||||||||||
(EN 1.1191 Equiv.) KJPMK (EN 1.1191 Equiv. Hardened) KJPMKH (EN 1.4301 Equiv.) KJPMKS (EN 1.4125 Equiv.) KJPMKC | (EN 1.1191 Equiv.) KJPMX (EN 1.1191 Equiv. Hardened) KJPMXH (EN 1.4301 Equiv.) KJPMXS (EN 1.4125 Equiv.) KJPMXC | 10 | 5.21~7.59 | 4~5 | 4, 5, 6 8, 10, 12 (P≥M) | 0~25 (L≤Sx3) When L=0, specify S as 0. | 5~25 (M≤B≤Mx3) | 10 15 | 1 2 3 | Angle Selectable When K=10, 1.8 When K=15, 2.7 | Angle Selectable When K=10, S D>P+2.8 When K=15, S D>P+3.7 X Dim. Selectable When X=1, S D>P+2.8 When X=2, S D>P+2.6 When X=3, S D>P+2.4 | ||
12 | 5.21~9.59 | 4~7 | |||||||||||
16 | 8.00~13.59 | 4~11 | 1/5 | 5 | X Dim. Selectable | ||||||||
20 | 10.00~17.59 | 6~15 | When X=1, 1.8 When X=2, 1.6 When X=3, 1.4 | When X=1, 0.2 When X=2, 0.4 When X=3, 0.6 | |||||||||
25 | 15.00~22.59 | 8~19 |
Part Number | P 0.01mm Increment | M (P-1≥M) Selection | 1mm Increment | |||||||||
Type | D | |||||||||||
Tapered, No Step | L | B | ||||||||||
(EN 1.1191 Equiv.) KJPMTN (EN 1.1191 Equiv. Hardened) KJPMTNH | 8 | 5.00~6.00 | 3 | 4 | 3~25 (L≤(P-1)x3) | 5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2) | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | |||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | ||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
25 | 15.00~23.00 |