We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMTH16L-P[16-25/0.01]-S[8-24/1]-MS10-L[0-25/1]-B[5-25/1]
Description
Slot Pins for Inspection Components/Threaded/Tapered
Stock availability:
On request
If you are looking for MISUMI KJPMTH16L-P[16-25/0.01]-S[8-24/1]-MS10-L[0-25/1]-B[5-25/1], call FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of outputs and individual attention to each consumer. We cherish everyone, who engaged with us - therefore, our regular buyers obtain the most flexible purchase forms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such clients, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Palestine, Macedonia, Hungary, Rwanda, Namibia, Chile, Brazil, Montenegro, Syria, Singapore, Jordan, Lebanon, Uzbekistan, Ireland, Senegal, Nigeria, Finland, Uruguay, Andorra, Comoros, Belize, Mozambique, Liberia, Bulgaria, Niger, Armenia, Philippines, Sudan, Poland, Yemen, Tonga, Albania, Mali, Uganda, Ukraine, Equatorial Guinea, Kiribati, Norway, Kazakhstan, Madagascar. A advanced logistics connection and a partnership network assist us to deliver our goods anywhere in the earth immediately without damaging product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of manufacturing equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as to stay on the top.
To inquire or make a request, call us by phone or write to the online chat on our site. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material1 | Hardness | Taper Shape Fixed | Angle Selection | X dimension Configurable | Tapered, No Step | |
Type | Type | Type | Type | |||
S 0 -0.02 | Sg6 | S 0 -0.02 | S 0 -0.02 | |||
EN 1.1191 Equiv. | - | KJPMT | KJPGMT | KJPMK | KJPMX | KJPMTN |
EN 1.1191 Equiv. | 45HRC~ | KJPMTH | KJPGMTH | KJPMKH | KJPMXH | KJPMTNH |
EN 1.4301 Equiv. | - | KJPMTS | KJPGMTS | KJPMKS | KJPMXS | - |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMTC | KJPGMTC | KJPMKC | KJPMXC | - |
Part Number (TYPE, D) | - | P | - | S | - | M | - | B | - | C | |||||
KJPKDT16 | - | P10.00 | - | S8 | - | M5 | - | B15 | - | C10 | |||||
Part Number (TYPE, D) | - | P | - | S | - | M | - | L | - | B | - | K | - | X | |
Taper Shape Fixed Angle K Selectable X Dimension Selectable Tapered, No Step | KJPMT12L KJPMKH16 KJPMXH20 KJPMTN8 | - - - - | P14.20 P11.50 P12.50 P5.60 | - - - | S10 S8 S11 | - - - - | M5 M6 M8 M4 | - - - - | L15 L10 L13 L10 | - - - - | B10 B10 B18 B10 | - | K10 | - | X2 |
S | g6 |
4~6 | -0.004 -0.012 |
7~10 | -0.005 -0.014 |
11~18 | -0.006 -0.017 |
19~29 | -0.007 -0.020 |
Part Number | P 0.01mm Increment | S (P-1≥S) 1mm Increment | M (S≥M) Selection | 1mm Increment | X | Y1, Y2 | K | ||||||||||
S 0 -0.02 | Sg6 | D | L | B | |||||||||||||
(EN 1.1191 Equiv.) KJPMT (EN 1.1191 Equiv. Hardened) KJPMTH (EN 1.4301 Equiv.) KJPMTS (EN 1.4125 Equiv.) KJPMTC | (EN 1.1191 Equiv.) KJPGMT (EN 1.1191 Equiv. Hardened) KJPGMTH (EN 1.4301 Equiv.) KJPGMTS (EN 1.4125 Equiv.) KJPGMTC | 8 | 5.00~6.00 | 4~5 | 3 | 4 | 0~25 (L≤Sx3) When L=0, specify S as 0. | 5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2) | 5 | 1 | Tapered 1/5 | ||||||
10 | 5.00~8.00 | 4~7 | 4 | 5 | 6 | ||||||||||||
12 | 5.00~10.00 | 4~9 | 4 | 5 | 6 | 8 | |||||||||||
16 | 8.00~14.00 | 7~13 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||||
20 | 10.00~18.00 | 9~17 | 5 | 6 | 8 | 10 | S10 | 12 | |||||||||
25 | 15.00~23.00 | 14~19 | |||||||||||||||
10L | 10.00~16.00 | 5~15 | 4 | 5 | 6 | 8 | 10 | S10 | |||||||||
12L | 12.00~20.00 | 6~19 | 5 | 6 | 8 | 10 | S10 | 12 | |||||||||
16L | 16.00~25.00 | 8~24 | 6 | 8 | 10 | S10 | 12 | ||||||||||
20L | 20.00~30.00 | 10~29 |
Part Number | P 0.01mm Increment | S 1mm Increment | M (S≥M) Selection | 1mm Increment | K | X | Y1 | Y2 | Condition | ||||
Type | D | L | B | Selection | Fixed | Selection | Fixed | ||||||
S 0 -0.02 | |||||||||||||
Angle Selection | X Dimension Selectable | ||||||||||||
(EN 1.1191 Equiv.) KJPMK (EN 1.1191 Equiv. Hardened) KJPMKH (EN 1.4301 Equiv.) KJPMKS (EN 1.4125 Equiv.) KJPMKC | (EN 1.1191 Equiv.) KJPMX (EN 1.1191 Equiv. Hardened) KJPMXH (EN 1.4301 Equiv.) KJPMXS (EN 1.4125 Equiv.) KJPMXC | 10 | 5.21~7.59 | 4~5 | 4, 5, 6 8, 10, 12 (P≥M) | 0~25 (L≤Sx3) When L=0, specify S as 0. | 5~25 (M≤B≤Mx3) | 10 15 | 1 2 3 | Angle Selectable When K=10, 1.8 When K=15, 2.7 | Angle Selectable When K=10, S D>P+2.8 When K=15, S D>P+3.7 X Dim. Selectable When X=1, S D>P+2.8 When X=2, S D>P+2.6 When X=3, S D>P+2.4 | ||
12 | 5.21~9.59 | 4~7 | |||||||||||
16 | 8.00~13.59 | 4~11 | 1/5 | 5 | X Dim. Selectable | ||||||||
20 | 10.00~17.59 | 6~15 | When X=1, 1.8 When X=2, 1.6 When X=3, 1.4 | When X=1, 0.2 When X=2, 0.4 When X=3, 0.6 | |||||||||
25 | 15.00~22.59 | 8~19 |
Part Number | P 0.01mm Increment | M (P-1≥M) Selection | 1mm Increment | |||||||||
Type | D | |||||||||||
Tapered, No Step | L | B | ||||||||||
(EN 1.1191 Equiv.) KJPMTN (EN 1.1191 Equiv. Hardened) KJPMTNH | 8 | 5.00~6.00 | 3 | 4 | 3~25 (L≤(P-1)x3) | 5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2) | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | |||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | ||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
25 | 15.00~23.00 |