We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMT20-P[10-18/0.01]-S0-MS10-L[0-25/1]-B[5-25/1]
Description
Slot Pins for Inspection Components/Threaded/Tapered
Stock availability:
On request
If you are questing MISUMI KJPMT20-P[10-18/0.01]-S0-MS10-L[0-25/1]-B[5-25/1], catch up with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of products and particular attention to each purchaser. We admire everyone, who cooperated with us - therefore, our regular customers procure the most desirable purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Jordan, Spain, Hungary, Central African Republic, Bangladesh, Lesotho, Senegal, Uruguay, Iran, France, Liberia, Belgium, Malaysia, Guinea, Iceland, Kenya, Kuwait, Malawi, Czech Republic, Latvia, Azerbaijan, Namibia, Haiti, Armenia, Mauritius, Tanzania, Turkmenistan, Australia, Kyrgyzstan, Finland, Andorra, East Timor, Burundi, Mali, Afghanistan, Bulgaria, Eswatini, Chile, Togo, Israel, Niger, Bosnia and Herzegovina, Tunisia. A well-shaped logistics series and a partnership network cheer us to conduct our units anywhere in the earth with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of factory-made equipment.
All items from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this amount is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To request or book, contact us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material1 | Hardness | Taper Shape Fixed | Angle Selection | X dimension Configurable | Tapered, No Step | |
Type | Type | Type | Type | |||
S 0 -0.02 | Sg6 | S 0 -0.02 | S 0 -0.02 | |||
EN 1.1191 Equiv. | - | KJPMT | KJPGMT | KJPMK | KJPMX | KJPMTN |
EN 1.1191 Equiv. | 45HRC~ | KJPMTH | KJPGMTH | KJPMKH | KJPMXH | KJPMTNH |
EN 1.4301 Equiv. | - | KJPMTS | KJPGMTS | KJPMKS | KJPMXS | - |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMTC | KJPGMTC | KJPMKC | KJPMXC | - |
Part Number (TYPE, D) | - | P | - | S | - | M | - | B | - | C | |||||
KJPKDT16 | - | P10.00 | - | S8 | - | M5 | - | B15 | - | C10 | |||||
Part Number (TYPE, D) | - | P | - | S | - | M | - | L | - | B | - | K | - | X | |
Taper Shape Fixed Angle K Selectable X Dimension Selectable Tapered, No Step | KJPMT12L KJPMKH16 KJPMXH20 KJPMTN8 | - - - - | P14.20 P11.50 P12.50 P5.60 | - - - | S10 S8 S11 | - - - - | M5 M6 M8 M4 | - - - - | L15 L10 L13 L10 | - - - - | B10 B10 B18 B10 | - | K10 | - | X2 |
S | g6 |
4~6 | -0.004 -0.012 |
7~10 | -0.005 -0.014 |
11~18 | -0.006 -0.017 |
19~29 | -0.007 -0.020 |
Part Number | P 0.01mm Increment | S (P-1≥S) 1mm Increment | M (S≥M) Selection | 1mm Increment | X | Y1, Y2 | K | ||||||||||
S 0 -0.02 | Sg6 | D | L | B | |||||||||||||
(EN 1.1191 Equiv.) KJPMT (EN 1.1191 Equiv. Hardened) KJPMTH (EN 1.4301 Equiv.) KJPMTS (EN 1.4125 Equiv.) KJPMTC | (EN 1.1191 Equiv.) KJPGMT (EN 1.1191 Equiv. Hardened) KJPGMTH (EN 1.4301 Equiv.) KJPGMTS (EN 1.4125 Equiv.) KJPGMTC | 8 | 5.00~6.00 | 4~5 | 3 | 4 | 0~25 (L≤Sx3) When L=0, specify S as 0. | 5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2) | 5 | 1 | Tapered 1/5 | ||||||
10 | 5.00~8.00 | 4~7 | 4 | 5 | 6 | ||||||||||||
12 | 5.00~10.00 | 4~9 | 4 | 5 | 6 | 8 | |||||||||||
16 | 8.00~14.00 | 7~13 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||||
20 | 10.00~18.00 | 9~17 | 5 | 6 | 8 | 10 | S10 | 12 | |||||||||
25 | 15.00~23.00 | 14~19 | |||||||||||||||
10L | 10.00~16.00 | 5~15 | 4 | 5 | 6 | 8 | 10 | S10 | |||||||||
12L | 12.00~20.00 | 6~19 | 5 | 6 | 8 | 10 | S10 | 12 | |||||||||
16L | 16.00~25.00 | 8~24 | 6 | 8 | 10 | S10 | 12 | ||||||||||
20L | 20.00~30.00 | 10~29 |
Part Number | P 0.01mm Increment | S 1mm Increment | M (S≥M) Selection | 1mm Increment | K | X | Y1 | Y2 | Condition | ||||
Type | D | L | B | Selection | Fixed | Selection | Fixed | ||||||
S 0 -0.02 | |||||||||||||
Angle Selection | X Dimension Selectable | ||||||||||||
(EN 1.1191 Equiv.) KJPMK (EN 1.1191 Equiv. Hardened) KJPMKH (EN 1.4301 Equiv.) KJPMKS (EN 1.4125 Equiv.) KJPMKC | (EN 1.1191 Equiv.) KJPMX (EN 1.1191 Equiv. Hardened) KJPMXH (EN 1.4301 Equiv.) KJPMXS (EN 1.4125 Equiv.) KJPMXC | 10 | 5.21~7.59 | 4~5 | 4, 5, 6 8, 10, 12 (P≥M) | 0~25 (L≤Sx3) When L=0, specify S as 0. | 5~25 (M≤B≤Mx3) | 10 15 | 1 2 3 | Angle Selectable When K=10, 1.8 When K=15, 2.7 | Angle Selectable When K=10, S D>P+2.8 When K=15, S D>P+3.7 X Dim. Selectable When X=1, S D>P+2.8 When X=2, S D>P+2.6 When X=3, S D>P+2.4 | ||
12 | 5.21~9.59 | 4~7 | |||||||||||
16 | 8.00~13.59 | 4~11 | 1/5 | 5 | X Dim. Selectable | ||||||||
20 | 10.00~17.59 | 6~15 | When X=1, 1.8 When X=2, 1.6 When X=3, 1.4 | When X=1, 0.2 When X=2, 0.4 When X=3, 0.6 | |||||||||
25 | 15.00~22.59 | 8~19 |
Part Number | P 0.01mm Increment | M (P-1≥M) Selection | 1mm Increment | |||||||||
Type | D | |||||||||||
Tapered, No Step | L | B | ||||||||||
(EN 1.1191 Equiv.) KJPMTN (EN 1.1191 Equiv. Hardened) KJPMTNH | 8 | 5.00~6.00 | 3 | 4 | 3~25 (L≤(P-1)x3) | 5~25 (M≤B≤Mx3) For M3 (M≤B≤Mx2) | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | |||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | ||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
25 | 15.00~23.00 |