We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPDS10-P[2.5-8/0.01]-S[2-7.5/0.01]-L[5-25/1]-B[5-25/1]
Description
Slot Pins for Inspection Components/Stepped/Straight
Stock availability:
On request
If you are seeking MISUMI KJPDS10-P[2.5-8/0.01]-S[2-7.5/0.01]-L[5-25/1]-B[5-25/1], reach FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of outcomes and special attention to each purchaser. We value everyone, who cooperated with us - thus, our regular purchasers procure the most convenient purchase forms and discounts on the factory-made equipment market. At present, there are more than 4500 such buyers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Spain, Oman, Honduras, Syria, France, Malawi, Philippines, Mauritius, Cuba, Luxembourg, Rwanda, Cape Verde, Sweden, Poland, Malaysia, Netherlands, Ecuador, Benin, Antigua and Barbuda, Fiji, Panama, Comoros, Russia, Belize, Burkina Faso, Nicaragua, South Korea, Gambia, Swaziland, South Sudan, Yemen, Finland, Zimbabwe, Peru, Seychelles, Madagascar, Israel, Hungary, Mozambique, Serbia, Latvia, Paraguay, Vietnam, Macedonia. A well-shaped logistics system and a partnership network let us to conduct our products anywhere in the world immediately without discrediting product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is growing every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To request or place an order, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
S 0 -0.02 | Sg6 | ||
EN 1.1191 Equiv. | - | KJPD | KJPGD |
EN 1.1191 Equiv. | 45HRC~ | KJPDH | KJPGDH |
EN 1.4301 Equiv. | - | KJPDS | KJPGDS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDSC | KJPGDSC |
Part Number (TYPE, D) | - | P | - | S | - | L | - | B |
KJPD12 | - | P8.03 | - | S5.00 | - | L5 | - | B10 |
S | g6 |
2.00~?3.00 | -0.002 -0.008 |
3.01~?6.00 | -0.004-0.012 |
6.01~10.00 | -0.005-0.014 |
10.01~18.00 | -0.006-0.017 |
18.01~30.00 | -0.007-0.020 |
Part Number | 0.01mm Increment | 1mm Increment | M | ||||
Type | D | P | S(P>S) | L | B | ||
(S 0 -0.02) | (Sg6) | ||||||
(EN 1.1191 Equiv.) KJPD (EN 1.1191 Equiv. Hardened) KJPDH (EN 1.4301 Equiv.) KJPDS (EN 1.4125 Equiv.) KJPDSC | (EN 1.1191 Equiv.) KJPGD (EN 1.1191 Equiv. Hardened) KJPGDH (EN 1.4301 Equiv.) KJPGDS (EN 1.4125 Equiv.) KJPGDSC | ?8 | ?2.50~?6.00 | ?2.00~?5.50 | 5~25 When P≤3.99, L≤Px4 For EN 1.4301 Equiv., L≤Px5 | 5~25 When S≤2.99, B≤Sx4 For EN 1.4301 Equiv., B≤Sx5 | M4 |
10 | ?2.50~?8.00 | ?2.00~?7.50 | M5 | ||||
12 | ?2.50~10.00 | ?2.00~?9.50 | M5 | ||||
16 | ?3.50~14.00 | ?3.00~13.50 | M5 | ||||
20 | 10.00~18.00 | ?5.00~17.00 | M5 | ||||
25 | 15.00~23.00 | ?8.00~22.00 | M5 | ||||
10L | 10.00~16.00 | ?5.00~15.00 | M5 | ||||
12L | 12.00~20.00 | ?6.00~19.00 | M5 | ||||
16L | 16.00~25.00 | ?8.00~24.00 | (L+B≤50) For longer pins, Here. | M5 | |||
20L | 20.00~30.00 | 10.00~29.00 | M5 |