We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPPHB20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1]
Description
Large Head/Tapered/Plastic Tip
Stock availability:
On request
If you are seeking MISUMI JPPHB20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1], call FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are illustrated in the quality of products and private attention to each buyer. We admire everyone, who liased with us - hence, our regular purchasers procure the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such clients, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Niger, Philippines, Mali, Chile, Cape Verde, Senegal, Palestine, Indonesia, Bosnia and Herzegovina, South Sudan, India, The Gambia, Czech Republic, Finland, Rwanda, Fiji, Chad, Laos, Ecuador, Cyprus, Paraguay, Bolivia, Antigua and Barbuda, Cameroon, Armenia, Latvia, Malta, Yemen, Lithuania, Tonga, Uzbekistan, Uruguay, Kazakhstan, Egypt, Nigeria, Thailand, Iceland, Iran, Tunisia, Eswatini, Jamaica, Bulgaria, Malaysia, Norway, Haiti, Mongolia, Serbia, Uganda, Iraq. A well-shaped logistics network and a partnership network allow us to conduct our goods anywhere in the globe quickly without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as to stay on the top.
To get some advice or book, contact us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Pin | Head | Type | D Tolerance and Shape Code | |
Material | Hardness | Plastic Material | |||
EN 1.2510 Equiv. | Treated Hardness: 60 ~ 63HRC | MC Nylon | JPPH | B (Press Fit, m6) PB (Press Fit, p6) TA (Tapped, g6) NA (Threaded, g6) | |
EN 1.4301 Equiv. | - | SJPPH | |||
EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | CJPPH |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | Shape | D | ||||||||
JPPH | B | 8 | - | P10.00 | - | L10 | - | B5.5 | ||
CJPPH | TA | 16 | - | P25.00 | - | L22 | - | B13.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | m | x | ? | Unit Price | ||||||
Type | Shape Code | D | D dim. Tolerance | EN 1.2510 Equiv. Hardened JPPHB JPPHPB | EN 1.4301 Equiv. SJPPHB SJPPHPB | EN 1.4125 Equiv. CJPPHB CJPPHPB | ||||||||
m6 | p6 | |||||||||||||
JPPH SJPPH CJPPH | B (m6) PB (p6) | ?5 | +0.012 +0.004 | +0.020 +0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 1 | 5 | 4 | 1 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | |||||||||||
?8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | ||||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | ||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | ||||||||||
16 | 17.00~25.00 | 16~32 | 3 | 6 | 5 | |||||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N cm | ? | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHTA | EN 1.4301 Equiv. SJPPHTA | EN 1.4125 Equiv. CJPPHTA | ||||||||
JPPH SJPPH CJPPH | TA | ?5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 5 | 4 | M2 | - | 3 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | |||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | |||||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | |||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | M6 | 2803 | 9 | ||||||||
16 | 17.00~25.00 | 16~32 | 6 | 5 | ||||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N cm | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHNA | EN 1.4301 Equiv. SJPPHNA | EN 1.4125 Equiv. CJPPHNA | |||||||
JPPH SJPPH CJPPH | NA | ?5 | -0.004 -0.012 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5 | 4 | M5 | 676 | |||
?6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | |||||||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | ||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | M12 | 9702 | ||||||||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 6 | 5 | M16 | 24108 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | M20 | 46942 |