We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPAT5-[2-10/0.01]
Description
Height Adjust Pins/Press Fit/L Configurable
Stock availability:
On request
If you are seeking MISUMI JPAT5-[2-10/0.01], communicate with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of outcomes and private attention to each purchaser. We praise everyone, who cooperated with us - so, our regular consumers procure the most attractive purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 3500 such consumers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the planet Germany, United Kingdom, San Marino, Kyrgyzstan, Haiti, Australia, Monaco, Dominican Republic, The Bahamas, United Arab Emirates, Papua New Guinea, Romania, Brazil, Nepal, Hungary, Japan, Sudan, Netherlands, Moldova, Finland, Syria, Guatemala, Austria, Russia, Senegal, Burkina Faso, Poland, Morocco, Jamaica, Mozambique, Cyprus, Mauritius, Comoros, Kiribati, Malaysia, Fiji, Suriname, Sweden, China, South Korea, Latvia, Rwanda, Togo, Libya, Indonesia, Ireland, Dominica, Central African Republic, Botswana, Slovakia. A well-shaped logistics link and a partnership network guide us to conduct our items anywhere in the planet immediately without discrediting product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are happy that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To request or order, call us by phone or write a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||
L Configurable | D and L Configurable | |||||
d dim. Tolerance p6 | d dim. Tolerance m6 | d dim. Tolerance p6 | d dim. Tolerance m6 | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPAT | JPAM | JPATF | JPAMF |
EN 1.2510 Equiv. | Black Oxide | Treated Hardness: 60 ~ 63HRC | BJPAT | BJPAM | BJPATF | BJPAMF |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | HJPAT | HJPAM | HJPATF | HJPAMF |
EN 1.4301 Equiv. | - | - | SJPAT | SJPAM | SJPATF | SJPAMF |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPAT | CJPAM | CJPATF | CJPAMF |
Part Number | - | L | |
JPAT8 JPHU3 | - - | 15.00 10.00 | (Press Fit, L Configurable) (Counterbored, L Configurable) |
Part Number | - | L | - | D | |
JPATF8 JPHUZ5 | - - | 15.00 10.00 | - - | 12 20 | (Press Fit, D and L Configurable) (Counterbore, D and L Configurable) |
Part Number | L 0.01mm Increment | D | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPAT JPAM | BJPAT BJPAM | HJPAT HJPAM | SJPAT SJPAM | CJPAT CJPAM | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPAT BJPAT HJPAT SJPAT CJPAT | d dim. Tolerance m6 JPAM BJPAM HJPAM SJPAM CJPAM | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 6 | 5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 8 | 6 | ||||||||
5 | 10 | 8 | ||||||||||
6 | 5.00~30.00 | 12 | ||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 16 | 10 | ||||||||
10 | 10.00~50.00 | 18 | 12 | |||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 20 | 15 |
Part Number | L 0.01mm Increment | D 1mm Increment | ? | Unit Price | ||||||||
Type | d | d dim. Tolerance | JPATF JPAMF | BJPATF BJPAMF | HJPATF HJPAMF | SJPATF SJPAMF | CJPATF CJPAMF | |||||
m6 | p6 | |||||||||||
d dim. Tolerance p6 JPATF BJPATF HJPATF SJPATF CJPATF | d dim. Tolerance m6 JPAMF BJPAMF HJPAMF SJPAMF CJPAMF | 3 | +0.008 +0.002 | +0.012 +0.006 | 2.00~10.00 | 5~30
(d5 | | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6 | |||||||||
5 | 8 | |||||||||||
6 | 5.00~30.00 | |||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 10 | |||||||||
10 | 10.00~50.00 | 12 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 15 |