We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HLPSQAH10-L[5-40/0.1]
Description
Straight/Sphere/Standard/Tapped
Stock availability:
On request
If you are seeking MISUMI HLPSQAH10-L[5-40/0.1], communicate with FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of products and private attention to each consumer. We value everyone, who engaged with us - so, our regular purchasers bring in the most attractive purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4500 such consumers, and we constantly arrange new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Barbados, Singapore, Suriname, Egypt, India, Ukraine, Lebanon, Tajikistan, Qatar, Liechtenstein, Burkina Faso, Belize, Oman, Cyprus, Zambia, Slovakia, Albania, Botswana, South Sudan, Belarus, Mauritius, Afghanistan, Laos, Fiji, Nepal, Malta, Poland, Costa Rica, Georgia, Russia, Latvia, Antigua and Barbuda, United States, Guatemala, Malaysia, Togo. A well-built logistics network and a partnership network allow us to conduct our units anywhere in the earth quickly without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the sphere of industrial equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this amount is rising every day. We are happy that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as to stay on the top.
To consult or make a request, call us by phone or write to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | |
Press Fit | Tapped | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | LPSQA | LPSQTA | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GLPSQA | GLPSQTA | |
EN 1.2510 Equiv. | - | - | BLPSQA | BLPSQTA | |
EN 1.4301 Equiv. | - | - | SLPSQA | SLPSQTA | |
EN 1.4301 Equiv. | Hard Chrome Plating | Plating Hardness: 750HV ~ | HLPSQA | HLPSQTA | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CLPSQA | CLPSQTA |
Part Number | - | L | |||
Type | Tolerance | D | |||
LPSQA | M | 6 | - | L14.0 | |
BLPSQTA | G | 8 | - | L29.3 |
D | Standard Grade | |||
M | P | G | H | |
m6 | p6 | g6 | h7 | |
1~3 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 |
4~6 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 |
8, 10 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 |
Part Number | L 0.1mm Increment | C | Unit Price | |||||||
Type | D Tol. | D | EN 1.2510 Equiv. Hardened LPSQA | Harda EN 1.2510 Equiv. GLPSQA | EN 1.2510 Equiv. BLPSQA | EN 1.4301 Equiv. SLPSQA | Hard EN 1.4301 Equiv. HLPSQA | EN 1.4125 Equiv. CLPSQA | ||
LPSQA GLPSQA BLPSQA SLPSQA HLPSQA CLPSQA | M (m6) P (p6) G (g6) H (h7) | 1 | 3.0~10.0 | 0.1 | ||||||
2 | 3.0~20.0 | 0.5 | ||||||||
3 | ||||||||||
4 | 1 | |||||||||
5 | 5.0~30.0 | |||||||||
6 | ||||||||||
8 | 5.0~40.0 | 1.5 | ||||||||
10 | 2 |
Part Number | L 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ? | Unit Price | |||||||
Type | D Tol. | D | EN 1.2510 Equiv. Hardened LPSQTA | Hard EN 1.2510 Equiv. GLPSQTA | EN 1.2510 Equiv. BLPSQTA | EN 1.4301 Equiv. SLPSQTA | Hard EN 1.4301 Equiv. HLPSQTA | EN 1.4125 Equiv. CLPSQTA | ||||
LPSQTA GLPSQTA BLPSQTA SLPSQTA HLPSQTA CLPSQTA | M (m6) P (p6) G (g6) H (h7) | 5 | 10.0~30.0 | M2 | - | 3 | ||||||
6 | M3 | 147 | 5 | |||||||||
8 | 15.0~40.0 | M5 | 676 | 8 | ||||||||
10 |