We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI HHPT15-SET, contact FAMAGA, the world's key vendor of industrial equipment. Our company has progressed for more than ten years - these are years of experience, which are symbolized in the quality of products and private attention to each consumer. We appreciate everyone, who worked with us - therefore, our regular customers procure the most acceptable purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 750 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Mozambique, Kenya, Nigeria, Dominican Republic, Slovenia, Eritrea, Papua New Guinea, Netherlands, Hungary, Costa Rica, Senegal, Croatia, The Bahamas, Iran, Philippines, Haiti, Russia, Mauritania, Cyprus, El Salvador, Cameroon, Serbia, Swaziland, Switzerland, Poland, Laos, Vietnam, Jamaica, Fiji, Yemen, Chile, Togo, Bangladesh, Peru, Ghana, Sweden, Kuwait, Ireland, Georgia, Uruguay, Cape Verde, Iceland, Mauritius, Malta. A well-built logistics bond and a partnership network let us to deliver our items anywhere in the world as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, contact us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Name | Material |
Hinge Plate | EN 1.4301 Equiv. |
Plastic Barrel | Polyacetal |
Shaft | EN 1.4305 Equiv. |
Plate | EN 1.4301 Equiv. |
Swage Pin | EN 1.4567 Equiv. |
Part Number |
HHPT7 |
Part Number | Rated Torque* | Mass (g) | L | W | P | J | S | T | E | R | Unit Price | Volume Discount Rate | ||
Type | No. | N • m | kgf • cm | 1 ~ 19 pc (s). | 20~50 | |||||||||
HHPT | 3 | 0.35 | 3.4 | 15 | 32 | 36 | 18 | 7.5 | 21 | 1.2 | 4.25 | 7.5 | ||
7 | 0.7 | 6.9 | 28 | 40 | 48 | 26 | 8 | 32 | 1.2 | 4.75 | 8.5 | |||
15 | 1.5 | 14.7 | 64 | 50 | 48 | 36 | 8 | 32 | 2 | 6.5 | 12 | |||
* Rated torque has a margin of error between +40% and -20%. * Rated torque value is for a single hinge. |