We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CJPPHPB5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
Description
Large Head/Tapered/Plastic Tip
Stock availability:
On request
If you are seeking MISUMI CJPPHPB5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1], call FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each orderer. We appreciate everyone, who joined with us - hence, our regular purchasers get the most acceptable purchase forms and discounts on the factory-made equipment market. Now, there are more than 4500 such clients, and we constantly sign new agreements. More than 750 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Guinea, Andorra, Saudi Arabia, Kyrgyzstan, Grenada, Slovenia, Nigeria, Vietnam, Egypt, Equatorial Guinea, Uruguay, Serbia, Algeria, Tajikistan, Namibia, Laos, Denmark, Benin, Liberia, Dominica, Cyprus, Australia, Belarus, Slovakia, Liechtenstein, Niger, Cameroon, Sudan, Mozambique, Rwanda, Poland, Israel, Brazil, Iceland, Jamaica, Panama, Argentina, Chile, Zambia, Iraq, Ukraine, Tanzania, Turkey, Haiti, Montenegro, Antigua and Barbuda. A well-shaped logistics series and a partnership network guide us to conduct our elements anywhere in the globe with no delay without discrediting product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Pin | Head | Type | D Tolerance and Shape Code | |
Material | Hardness | Plastic Material | |||
EN 1.2510 Equiv. | Treated Hardness: 60 ~ 63HRC | MC Nylon | JPPH | B (Press Fit, m6) PB (Press Fit, p6) TA (Tapped, g6) NA (Threaded, g6) | |
EN 1.4301 Equiv. | - | SJPPH | |||
EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | CJPPH |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | Shape | D | ||||||||
JPPH | B | 8 | - | P10.00 | - | L10 | - | B5.5 | ||
CJPPH | TA | 16 | - | P25.00 | - | L22 | - | B13.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | m | x | ? | Unit Price | ||||||
Type | Shape Code | D | D dim. Tolerance | EN 1.2510 Equiv. Hardened JPPHB JPPHPB | EN 1.4301 Equiv. SJPPHB SJPPHPB | EN 1.4125 Equiv. CJPPHB CJPPHPB | ||||||||
m6 | p6 | |||||||||||||
JPPH SJPPH CJPPH | B (m6) PB (p6) | ?5 | +0.012 +0.004 | +0.020 +0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 1 | 5 | 4 | 1 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | |||||||||||
?8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | ||||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | ||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | ||||||||||
16 | 17.00~25.00 | 16~32 | 3 | 6 | 5 | |||||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N cm | ? | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHTA | EN 1.4301 Equiv. SJPPHTA | EN 1.4125 Equiv. CJPPHTA | ||||||||
JPPH SJPPH CJPPH | TA | ?5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 5 | 4 | M2 | - | 3 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | |||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | |||||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | |||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | M6 | 2803 | 9 | ||||||||
16 | 17.00~25.00 | 16~32 | 6 | 5 | ||||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N cm | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHNA | EN 1.4301 Equiv. SJPPHNA | EN 1.4125 Equiv. CJPPHNA | |||||||
JPPH SJPPH CJPPH | NA | ?5 | -0.004 -0.012 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5 | 4 | M5 | 676 | |||
?6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | |||||||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | ||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | M12 | 9702 | ||||||||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 6 | 5 | M16 | 24108 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | M20 | 46942 |