We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CJPPHNA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]
Description
Large Head/Tapered/Plastic Tip
Stock availability:
On request
If you are pursuing MISUMI CJPPHNA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1], call FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each user. We appreciate everyone, who collaborated with us - hence, our regular consumers pick up the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such purchasers, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Saudi Arabia, Norway, Uzbekistan, Austria, Liberia, Oman, Zambia, Djibouti, South Korea, Bosnia and Herzegovina, Sudan, Samoa, Papua New Guinea, Burma, Niger, Mali, Kenya, Egypt, Liechtenstein, Costa Rica, Grenada, Switzerland, Uganda, Mozambique, Rwanda, Burundi, Israel, Andorra, Sierra Leone, Afghanistan, Paraguay, Mexico, Libya, Hungary, Lithuania, Qatar, Bolivia, Slovakia, Kyrgyzstan, Namibia, Angola, Armenia, Macedonia, New Zealand, Antigua and Barbuda, Thailand, North Korea. A well-built logistics bond and a partnership network allow us to ship our goods anywhere in the globe quickly without compromising product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this quantity is rising every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Pin | Head | Type | D Tolerance and Shape Code | |
Material | Hardness | Plastic Material | |||
EN 1.2510 Equiv. | Treated Hardness: 60 ~ 63HRC | MC Nylon | JPPH | B (Press Fit, m6) PB (Press Fit, p6) TA (Tapped, g6) NA (Threaded, g6) | |
EN 1.4301 Equiv. | - | SJPPH | |||
EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | CJPPH |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | Shape | D | ||||||||
JPPH | B | 8 | - | P10.00 | - | L10 | - | B5.5 | ||
CJPPH | TA | 16 | - | P25.00 | - | L22 | - | B13.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | m | x | ? | Unit Price | ||||||
Type | Shape Code | D | D dim. Tolerance | EN 1.2510 Equiv. Hardened JPPHB JPPHPB | EN 1.4301 Equiv. SJPPHB SJPPHPB | EN 1.4125 Equiv. CJPPHB CJPPHPB | ||||||||
m6 | p6 | |||||||||||||
JPPH SJPPH CJPPH | B (m6) PB (p6) | ?5 | +0.012 +0.004 | +0.020 +0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 1 | 5 | 4 | 1 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | |||||||||||
?8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | ||||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | ||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | ||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | ||||||||||
16 | 17.00~25.00 | 16~32 | 3 | 6 | 5 | |||||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N cm | ? | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHTA | EN 1.4301 Equiv. SJPPHTA | EN 1.4125 Equiv. CJPPHTA | ||||||||
JPPH SJPPH CJPPH | TA | ?5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | 5 | 4 | M2 | - | 3 | |||
?6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 147 | 5 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 676 | 8 | |||||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | |||||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | |||||||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | M6 | 2803 | 9 | ||||||||
16 | 17.00~25.00 | 16~32 | 6 | 5 | ||||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | x | M (Coarse) | * Tightening Torque N cm | Unit Price | |||||
Type | Shape Code | D | D dim. Tolerance g6 | EN 1.2510 Equiv. Hardened JPPHNA | EN 1.4301 Equiv. SJPPHNA | EN 1.4125 Equiv. CJPPHNA | |||||||
JPPH SJPPH CJPPH | NA | ?5 | -0.004 -0.012 | 5.50~8.00 | 3~10 | 2.0~10.0 | 5 | 4 | M5 | 676 | |||
?6 | 6.50~10.00 | 3~10 | 2.0~12.0 | M6 | 1156 | ||||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 2.0~15.0 | M8 | 2803 | |||||||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | M10 | 5557 | ||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 8~15 | M12 | 9702 | ||||||||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 6 | 5 | M16 | 24108 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | M20 | 46942 |