We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
AFPMD2-P[2.5-4/0.01]-L[2-6/1]-B[1-10/0.1]
Description
Large Head Round/Nonmagnetic Type/Standard
Stock availability:
On request
If you are looking for MISUMI AFPMD2-P[2.5-4/0.01]-L[2-6/1]-B[1-10/0.1], catch up with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of outputs and personalseparate attention to each buyer. We admire everyone, who liased with us - hence, our regular buyers procure the most helpful purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such consumers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Greece, Malawi, Honduras, Pakistan, Belgium, Lebanon, Namibia, Myanmar, Iraq, Andorra, Guyana, Monaco, Tajikistan, Rwanda, Bhutan, Kazakhstan, Gambia, Hungary, Cameroon, Australia, Azerbaijan, Moldova, Burundi, Austria, Kyrgyzstan, Seychelles, Bosnia and Herzegovina, Denmark, Switzerland, Uruguay, Mali, Central African Republic, Tunisia, Antigua and Barbuda, Turkey, Tanzania, Jordan, Laos, India, Montenegro. A well-elaborated logistics network and a partnership network allow us to dispatch our goods anywhere in the globe quickly without undermining product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is growing every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or order, contact us or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Tip Shape | Type | ||
Press Fit | Tapped | Threaded | |||
EN AW-2017 Equiv. | Clear Anodize | Round | AFPMA | AFPMTA | AFPMNA |
Diamond | AFPMD | AFPMTD | AFPMND |
Part Number | - | P | - | L | - | B |
AFPMA6 | - | P8.50 | - | L6 | - | B3.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | m | (W) | ? | Unit Price | |||
Type | D | d dim. Tolerance m6 | AFPMA | AFPMD | |||||||
AFPMA AFPMD Diamond Shape is applicable when D?2. | 1 | +0.008 +0.002 | 1.50~2.50 | 2, 3 | 1.0~5.0 | 0.1 | 0.5 | - | 0 | - | |
2 | 2.50~4.00 | 2~6 | 1.0~10.0 | 0.5 | 1 | 1.2 | |||||
3 | 3.50~6.00 | 3~6 | 1.0~10.0 | 2 | 1.5 | 1 | |||||
4 | +0.012 +0.004 | 4.50~7.00 | 4~8 | 1.0~10.0 | 1 | 3 | 1.8 | ||||
5 | 5.50~8.00 | 5~10 | 1.0~10.0 | 2.2 | |||||||
6 | 6.50~10.00 | 6~12 | 1.0~12.0 | 3 | |||||||
8 | +0.015 +0.006 | 9.00~13.00 | 8~16 | 1.0~15.0 | 1.5 | 4 | 3.5 | ||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | 4 | ||||||
12 | +0.018 +0.007 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | ||||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 5.5 | 2 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | 5 | 7 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | ? | M (Coarse) | Recommended Tightening Torque (kgf cm) | Unit Price | |||
Type | D | D dim. Tolerance g6 | AFPMTA | AFPMTD | ||||||||
AFPMTA AFPMTD | 6 | -0.004 -0.012 | 6.50~10.00 | 6(9)~12 | 2.0~12.0 | 3 | 3 | 5 | M3 | 6.25 | ||
8 | -0.005 -0.014 | 9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | 8 | M5 | 10 | |||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | ||||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | 10 | M8 | 22.5 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | 12 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | Recommended Tightening Torque (kgf cm) | Unit Price | |||
Type | D | D dim. Tolerance g6 | AFPMNA | AFPMND | |||||||
AFPMNA AFPMND | 3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 2 | 1.5 | 3 | 5 | ||
4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 3 | 1.8 | 4 | 7 | |||
5 | 5.50~8.00 | 3~10 | 1.0~10.0 | 2.2 | 5 | 8.75 | |||||
6 | 6.50~10.00 | 3~10 | 1.0~12.0 | 3 | 6 | 17.5 | |||||
8 | -0.005 -0.014 | 9.00~13.00 | 5~10 | 1.0~15.0 | 4 | 3.5 | 8 | 18.75 | |||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 4 | 10 | 27.5 | |||||
12 | -0.006 -0.017 | 13.00~18.00 | 8~15 | 3.0~20.0 | 5 | 12 | 92.5 | ||||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 5 | 7 | 16 | 100 |