We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
THNTDB20-P[23-35/0.1]-B[5-30/1]-L[10-40/1]
Description
Jig Pins/Standard(h7)/Bullet Nose/Selectable Shank/No Shoulder
Stock availability:
On request
If you are seeking MISUMI THNTDB20-P[23-35/0.1]-B[5-30/1]-L[10-40/1], reach FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and particular attention to each orderer. We value everyone, who conspired with us - hence, our regular consumers obtain the most acceptable purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4000 such customers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Hungary, Italy, Iraq, Costa Rica, South Africa, Finland, Japan, Nicaragua, Comoros, Seychelles, Monaco, Lebanon, Liberia, Angola, Haiti, Bhutan, Cameroon, Latvia, Armenia, Poland, Belize, Dominica, Romania, Ukraine, Argentina, Togo, Panama, Vietnam, Nigeria, Guatemala, Indonesia, Zimbabwe, Malaysia, Moldova, Belarus, Egypt, Peru, Antigua and Barbuda, South Korea, East Timor, Tajikistan, Iran, Luxembourg, Slovakia, Albania, Australia, Suriname, Pakistan. A well-shaped logistics series and a partnership network cheer us to send our elements anywhere in the planet with no delay without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is rising every day. We are pleased that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | Material | Hardness | ||
Type | Retaining Part Shape | Shape | ||
HNTAX | N (Threaded) T (Set Screw) B (Screw Mounted) | Round | EN 1.7220 Equiv. | Treated Hardness 35~40HRC |
HNTD | Diamond | |||
THNTA | Round | EN 1.7242 Equiv. | Carburized Hardness 55HRC~ (Depth: 0.7 ~ 0.8) Anti-carburizing on Tapped Part | |
THNTD | Diamond |
Type | Retaining Part Shape | Shape | Material | Hardness | Surface Treatment |
D-HNTA | N (Threaded) T (Set Screw) | Round | EN 1.2379 Equiv. | 55HRC ~ (Surface 3000HV) | Dicoat Process |
D-HNTD | Diamond |
Part Number | - | P | - | B | - | L | ||||
Type | Retaining Part Shape | D | ||||||||
HATA | N | 8 | - | P7.8 | - | B15 | - | L8 | ||
HNTAX | T | 8 | - | P12.0 | - | B15 |
Part Number | P 0.1mm Increment | B 1mm Increment | L | ? | L1 | ?1 | d | Applicable Set Screw | M (Coarse) | R | W | ||||||||||
Type | Retaining Part Shape | Dh7 | Threaded Selection | Screw Mounted 1mm Increment | Screw Mounted | ||||||||||||||||
Hardened (Round) HNTAX (Diamond) HNTD | Carburized (Round) THNTA (Diamond) THNTD | Dicoat (Round) D-HNTA (Diamond) D-HNTD | N (Threaded) T (Set Screw) B (Screw Mounted) | 6 | 0 - 0.015 | ?9.0~12.0 | 5~30 (B≤P?3) | 5 | 8 | 10 | - | 6 | 8 | 8 | 4 | M5 | - | 2 | 3 | ||
8 | 11.0~16.0 | 5 | 8 | 10 | 12 | 15 | 10~20 | 10 | 5 | M4 | 3.5 | ||||||||||
10 | 13.0~20.0 | 5~30 (B≤P?4) | (5) | (8) | 10 | 12 | 15 | 10~30 | 12 | 10 | 7 | M6 | M5 | 4 | |||||||
10T | 18 | 5 | M6 | 5 | |||||||||||||||||
12 | 0 - 0.018 | 15.0~25.0 | (8) | 10 | 12 | 15 | 18 | 15 | 12 | 10 | 9 | M8 | M5 | 3 | 6 | ||||||
16 | 19.0~32.0 | (10) | 12 | 15 | 18 | 20 | 10~32 | 18 | 13 | M8 | 8 | ||||||||||
20 | 0 - 0.021 | 23.0~35.0 | 12 | 15 | 18 | 20 | 10~40 | 22 | 17 | M10 | 9 |