We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
THNTDB16-P[19-32/0.1]-B[5-30/1]-L[10-32/1]
Description
Jig Pins/Standard(h7)/Bullet Nose/Selectable Shank/No Shoulder
Stock availability:
On request
If you are looking for MISUMI THNTDB16-P[19-32/0.1]-B[5-30/1]-L[10-32/1], call FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are years of experience, which are symbolized in the quality of outputs and individual attention to each user. We cherish everyone, who liased with us - therefore, our regular consumers get the most flexible purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Burkina Faso, Portugal, Zimbabwe, Algeria, Guinea-Bissau, Lithuania, Liberia, Liechtenstein, Paraguay, Libya, Gambia, Honduras, Monaco, Jordan, Iraq, Singapore, Philippines, Ghana, Estonia, Kyrgyzstan, El Salvador, Uganda, Malawi, Togo, United States, Macedonia, Eswatini, Norway, Luxembourg, Niger, Bulgaria, Sierra Leone, Tonga, Ireland, Hungary, Slovakia, Laos, Georgia, Rwanda, Sudan, Bosnia and Herzegovina, Nepal, Iceland, Mauritania, Zambia, Morocco, Uruguay, Mali. A advanced logistics bond and a partnership network guide us to deliver our units anywhere in the planet with no delay without discrediting product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as stay in control.
To ask a question or book, contact us or write to the online chat on our site. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | Material | Hardness | ||
Type | Retaining Part Shape | Shape | ||
HNTAX | N (Threaded) T (Set Screw) B (Screw Mounted) | Round | EN 1.7220 Equiv. | Treated Hardness 35~40HRC |
HNTD | Diamond | |||
THNTA | Round | EN 1.7242 Equiv. | Carburized Hardness 55HRC~ (Depth: 0.7 ~ 0.8) Anti-carburizing on Tapped Part | |
THNTD | Diamond |
Type | Retaining Part Shape | Shape | Material | Hardness | Surface Treatment |
D-HNTA | N (Threaded) T (Set Screw) | Round | EN 1.2379 Equiv. | 55HRC ~ (Surface 3000HV) | Dicoat Process |
D-HNTD | Diamond |
Part Number | - | P | - | B | - | L | ||||
Type | Retaining Part Shape | D | ||||||||
HATA | N | 8 | - | P7.8 | - | B15 | - | L8 | ||
HNTAX | T | 8 | - | P12.0 | - | B15 |
Part Number | P 0.1mm Increment | B 1mm Increment | L | ? | L1 | ?1 | d | Applicable Set Screw | M (Coarse) | R | W | ||||||||||
Type | Retaining Part Shape | Dh7 | Threaded Selection | Screw Mounted 1mm Increment | Screw Mounted | ||||||||||||||||
Hardened (Round) HNTAX (Diamond) HNTD | Carburized (Round) THNTA (Diamond) THNTD | Dicoat (Round) D-HNTA (Diamond) D-HNTD | N (Threaded) T (Set Screw) B (Screw Mounted) | 6 | 0 - 0.015 | ?9.0~12.0 | 5~30 (B≤P?3) | 5 | 8 | 10 | - | 6 | 8 | 8 | 4 | M5 | - | 2 | 3 | ||
8 | 11.0~16.0 | 5 | 8 | 10 | 12 | 15 | 10~20 | 10 | 5 | M4 | 3.5 | ||||||||||
10 | 13.0~20.0 | 5~30 (B≤P?4) | (5) | (8) | 10 | 12 | 15 | 10~30 | 12 | 10 | 7 | M6 | M5 | 4 | |||||||
10T | 18 | 5 | M6 | 5 | |||||||||||||||||
12 | 0 - 0.018 | 15.0~25.0 | (8) | 10 | 12 | 15 | 18 | 15 | 12 | 10 | 9 | M8 | M5 | 3 | 6 | ||||||
16 | 19.0~32.0 | (10) | 12 | 15 | 18 | 20 | 10~32 | 18 | 13 | M8 | 8 | ||||||||||
20 | 0 - 0.021 | 23.0~35.0 | 12 | 15 | 18 | 20 | 10~40 | 22 | 17 | M10 | 9 |