We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
THNTDB12-P[15-25/0.1]-B[5-30/1]-L[10-30/1]
Description
Jig Pins/Standard(h7)/Bullet Nose/Selectable Shank/No Shoulder
Stock availability:
On request
If you are inspecting MISUMI THNTDB12-P[15-25/0.1]-B[5-30/1]-L[10-30/1], communicate with FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are cycles of experience, which are symbolized in the quality of products and individual attention to each consumer. We esteem everyone, who cooperated with us - hence, our regular purchasers bring in the most helpful purchase forms and discounts on the factory-made equipment market. At present, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the planet Germany, United Kingdom, Israel, Dominican Republic, Sierra Leone, Haiti, Cambodia, Samoa, Monaco, Fiji, Mexico, Comoros, The Bahamas, Burma, Gambia, The Gambia, Zimbabwe, Grenada, Malta, Madagascar, Nigeria, Mozambique, Burundi, Syria, Eritrea, Macedonia, Moldova, Djibouti, United Arab Emirates, Switzerland, Iceland, Egypt, Brunei, Tajikistan, Qatar, Brazil, Burkina Faso, Mauritania, Albania, Tunisia, Poland, Mauritius, Russia, Australia, Serbia, Chile, Finland, New Zealand, Sweden, Botswana. A advanced logistics system and a partnership network help us to dispatch our goods anywhere in the planet quickly without undermining product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is ascending every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Part Number | Material | Hardness | ||
Type | Retaining Part Shape | Shape | ||
HNTAX | N (Threaded) T (Set Screw) B (Screw Mounted) | Round | EN 1.7220 Equiv. | Treated Hardness 35~40HRC |
HNTD | Diamond | |||
THNTA | Round | EN 1.7242 Equiv. | Carburized Hardness 55HRC~ (Depth: 0.7 ~ 0.8) Anti-carburizing on Tapped Part | |
THNTD | Diamond |
Type | Retaining Part Shape | Shape | Material | Hardness | Surface Treatment |
D-HNTA | N (Threaded) T (Set Screw) | Round | EN 1.2379 Equiv. | 55HRC ~ (Surface 3000HV) | Dicoat Process |
D-HNTD | Diamond |
Part Number | - | P | - | B | - | L | ||||
Type | Retaining Part Shape | D | ||||||||
HATA | N | 8 | - | P7.8 | - | B15 | - | L8 | ||
HNTAX | T | 8 | - | P12.0 | - | B15 |
Part Number | P 0.1mm Increment | B 1mm Increment | L | ? | L1 | ?1 | d | Applicable Set Screw | M (Coarse) | R | W | ||||||||||
Type | Retaining Part Shape | Dh7 | Threaded Selection | Screw Mounted 1mm Increment | Screw Mounted | ||||||||||||||||
Hardened (Round) HNTAX (Diamond) HNTD | Carburized (Round) THNTA (Diamond) THNTD | Dicoat (Round) D-HNTA (Diamond) D-HNTD | N (Threaded) T (Set Screw) B (Screw Mounted) | 6 | 0 - 0.015 | ?9.0~12.0 | 5~30 (B≤P?3) | 5 | 8 | 10 | - | 6 | 8 | 8 | 4 | M5 | - | 2 | 3 | ||
8 | 11.0~16.0 | 5 | 8 | 10 | 12 | 15 | 10~20 | 10 | 5 | M4 | 3.5 | ||||||||||
10 | 13.0~20.0 | 5~30 (B≤P?4) | (5) | (8) | 10 | 12 | 15 | 10~30 | 12 | 10 | 7 | M6 | M5 | 4 | |||||||
10T | 18 | 5 | M6 | 5 | |||||||||||||||||
12 | 0 - 0.018 | 15.0~25.0 | (8) | 10 | 12 | 15 | 18 | 15 | 12 | 10 | 9 | M8 | M5 | 3 | 6 | ||||||
16 | 19.0~32.0 | (10) | 12 | 15 | 18 | 20 | 10~32 | 18 | 13 | M8 | 8 | ||||||||||
20 | 0 - 0.021 | 23.0~35.0 | 12 | 15 | 18 | 20 | 10~40 | 22 | 17 | M10 | 9 |