We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SXWTL-MX28-[161-1959/1]
Description
Linear Guides/Heavy Load
Stock availability:
On request
If you are looking for MISUMI SXWTL-MX28-[161-1959/1], reach FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are years of experience, which are outlined in the quality of items and special attention to each customer. We understand everyone, who collaborated with us - thus, our regular buyers get the most attractive purchase forms and discounts on the industrial equipment market. At this time, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 750 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Tunisia, Brazil, Colombia, Honduras, Egypt, Poland, El Salvador, North Korea, Iraq, Costa Rica, Nicaragua, Haiti, Monaco, Eritrea, Mauritius, Bolivia, Azerbaijan, Croatia, Mozambique, Djibouti, Macedonia, Burkina Faso, Ecuador, Dominica, New Zealand, Netherlands, India, Chile, Serbia, Argentina, Mexico, Jamaica, Belarus, Montenegro, Nepal, Comoros, Mongolia, East Timor, Kenya, Panama, Madagascar, Equatorial Guinea, Kuwait, China, Luxembourg, Syria. A well-elaborated logistics system and a partnership network guide us to ship our products anywhere in the world promptly without damaging product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this amount is rising every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Type | MX (Lubrication Units) | L Dimension | Material Hardness | ||||
1 block | 2 blocks | ||||||
Standard Grade | High Grade | Standard Grade | High Grade | ||||
Standard Block | SXR | SXRJ | SX2R | SX2RJ | Blank: None -MX: Provided | Selectable | Carbon Steel 58HRC~ |
SXRL | SXRLJ | SX2RL | SX2RLJ | Configurable | |||
Wide Block | Through Hole | SXW | - | SX2W | - | Selectable | |
SXWL | SX2WL | Configurable | |||||
Tapped Hole | SXWT | SX2WT | Selectable | ||||
SXWTL | SX2WTL | Configurable |
Part Number | - | L | |
SXR28 SXR-MX28 RXR28 SXRL28L SXRL28G | - - - - - | 880 880 880 880 880 | (With Lubrication Units) (LTBC Plating) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Guide Rail Dimension | ||||||||||||||||||||||
Type | MX | H | W | L1 | B | C | Sx? | L2 | K | T | Cb | Grease Fitting | H1 | W1 | W2 | Ca | Counterbored Hole | F | G | ||||||
Standard | MX | Mounting Hole | E | T1 | d1xd2xh | ||||||||||||||||||||
Standard Block | (1 block) SXR SXRL SXRJ SXRLJ | (2 blocks) SX2R SX2RL SX2RJ SX2RLJ | Blank: None -MX: Provided | 24 | 100~1480 (160) | 34 | 57 | 66.6 | 26 | 26 | M4x7 | 41 | 20 | 7 | 0.85 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 9.5 | 0.5 | 3.5x6x4.5 | 60 | 20 |
28 | 160~1960 (220) | 42 | 67 | 76.6 | 32 | 32 | M5x8 | 47.6 | 22.5 | 7.5 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 11 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 48 | 83 | 92.6 | 35 | 35 | M6x9 | 61 | 26.5 | 8 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 12.5 | 0.8 | 7x11x9 | 60 | 20 | ||||
Wide Block | (1 block) SXW SXWL SXWT SXWTL | (2 blocks) SX2W SX2WL SX2WT SX2WTL | 24 | 100~1480 (160) | 52 | 57 | 66.6 | 41 | 26 | 4.5 (M5) | 41 | 20 | 7 | 0.5 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 18.5 | 0.5 | 3.5x6x4.5 | 60 | 20 | |
28 | 160~1960 (220) | 59 | 67 | 76.6 | 49 | 32 | 5.5 (M6) | 47.6 | 22.5 | 9 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 19.5 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 73 | 83 | 92.6 | 60 | 35 | 7 (M8) | 61 | 26.5 | 10 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 25 | 0.8 | 7x11x9 | 60 | 20 |
H | Selectable L | Unit Price | |||||
1 block | 2 blocks | ||||||
SXR | SXW | SXWT | SX2R | SX2W | SX2WT | ||
24 | 100 | - | - | - | |||
160 | |||||||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
*1120 | |||||||
*1240 | |||||||
*1360 | |||||||
*1480 | |||||||
28 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 | |||||||
33 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 |
H | Unit Price | |||||
1 block | 2 blocks | |||||
SXRL | SXWL | SXWTL | SX2RL | SX2WL | SX2WTL | |
24 | ||||||
28 | ||||||
33 |
H | Unit Price | |
1 block | 2 blocks | |
24 | ||
28 | ||
33 |