We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SXWTL33L-[161-1959/1]
Description
Linear Guides/Heavy Load
Stock availability:
On request
If you are pursuing MISUMI SXWTL33L-[161-1959/1], communicate with FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are cycles of experience, which are symbolized in the quality of outcomes and private attention to each buyer. We appreciate everyone, who conspired with us - thus, our regular consumers accept the most beneficial purchase terms and discounts on the industrial equipment market. At this time, there are more than 4500 such clients, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, Cameroon, Niger, Honduras, Canada, Mauritania, Mozambique, Angola, Tonga, Sierra Leone, Haiti, Fiji, Zimbabwe, The Bahamas, Netherlands, Costa Rica, Togo, Ecuador, Malaysia, Seychelles, China, Kiribati, South Korea, Belize, Syria, Uruguay, Japan, Armenia, Hungary, Peru, Moldova, Afghanistan, Philippines, Burkina Faso, Bulgaria, Morocco, Mexico, Laos, Mauritius, Ukraine, United Arab Emirates, Indonesia, Algeria, Nepal, Cape Verde, Serbia, East Timor. A well-shaped logistics series and a partnership network guide us to conduct our goods anywhere in the world immediately without compromising product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this amount is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more progressive and technologically advanced industrial equipment so as stay in control.
To request or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Type | MX (Lubrication Units) | L Dimension | Material Hardness | ||||
1 block | 2 blocks | ||||||
Standard Grade | High Grade | Standard Grade | High Grade | ||||
Standard Block | SXR | SXRJ | SX2R | SX2RJ | Blank: None -MX: Provided | Selectable | Carbon Steel 58HRC~ |
SXRL | SXRLJ | SX2RL | SX2RLJ | Configurable | |||
Wide Block | Through Hole | SXW | - | SX2W | - | Selectable | |
SXWL | SX2WL | Configurable | |||||
Tapped Hole | SXWT | SX2WT | Selectable | ||||
SXWTL | SX2WTL | Configurable |
Part Number | - | L | |
SXR28 SXR-MX28 RXR28 SXRL28L SXRL28G | - - - - - | 880 880 880 880 880 | (With Lubrication Units) (LTBC Plating) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Guide Rail Dimension | ||||||||||||||||||||||
Type | MX | H | W | L1 | B | C | Sx? | L2 | K | T | Cb | Grease Fitting | H1 | W1 | W2 | Ca | Counterbored Hole | F | G | ||||||
Standard | MX | Mounting Hole | E | T1 | d1xd2xh | ||||||||||||||||||||
Standard Block | (1 block) SXR SXRL SXRJ SXRLJ | (2 blocks) SX2R SX2RL SX2RJ SX2RLJ | Blank: None -MX: Provided | 24 | 100~1480 (160) | 34 | 57 | 66.6 | 26 | 26 | M4x7 | 41 | 20 | 7 | 0.85 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 9.5 | 0.5 | 3.5x6x4.5 | 60 | 20 |
28 | 160~1960 (220) | 42 | 67 | 76.6 | 32 | 32 | M5x8 | 47.6 | 22.5 | 7.5 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 11 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 48 | 83 | 92.6 | 35 | 35 | M6x9 | 61 | 26.5 | 8 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 12.5 | 0.8 | 7x11x9 | 60 | 20 | ||||
Wide Block | (1 block) SXW SXWL SXWT SXWTL | (2 blocks) SX2W SX2WL SX2WT SX2WTL | 24 | 100~1480 (160) | 52 | 57 | 66.6 | 41 | 26 | 4.5 (M5) | 41 | 20 | 7 | 0.5 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 18.5 | 0.5 | 3.5x6x4.5 | 60 | 20 | |
28 | 160~1960 (220) | 59 | 67 | 76.6 | 49 | 32 | 5.5 (M6) | 47.6 | 22.5 | 9 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 19.5 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 73 | 83 | 92.6 | 60 | 35 | 7 (M8) | 61 | 26.5 | 10 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 25 | 0.8 | 7x11x9 | 60 | 20 |
H | Selectable L | Unit Price | |||||
1 block | 2 blocks | ||||||
SXR | SXW | SXWT | SX2R | SX2W | SX2WT | ||
24 | 100 | - | - | - | |||
160 | |||||||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
*1120 | |||||||
*1240 | |||||||
*1360 | |||||||
*1480 | |||||||
28 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 | |||||||
33 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 |
H | Unit Price | |||||
1 block | 2 blocks | |||||
SXRL | SXWL | SXWTL | SX2RL | SX2WL | SX2WTL | |
24 | ||||||
28 | ||||||
33 |
H | Unit Price | |
1 block | 2 blocks | |
24 | ||
28 | ||
33 |